Hydraulic T6CC T6CCW T67CB T67CBM T6DC T6EC T6GCC T67EC T6DCC T6EDC T6DDC T67EC T67EDC Parker Denison T6C vane pump cartridge

Hydraulic T6CC T6CCW T67CB T67CBM T6DC T6EC T6GCC T67EC T6DCC T6EDC T6DDC T67EC T67EDC Parker Denison T6C vane pump cartridge 

We produce standard T6 Parker Denison T6C T6D T6E T7E Single Double Triple Hydraulic Vane Pump Cartridge Kit Interchangeable OEM Cartridge Kit for the T6CC, T6DC, T6ED, T6EC, T6DCC, T6EDC, T6DDC & T67DC T67EC T67EDC T67DCW, T6CCW , series cartridge kit., with high quality replacement of Denison T6 series Vane pump. All of our T6 series complete pumps are completely with original Denison OEM products at not only outside dimensions, also top performance. 

Denison pump cartridge below:

1. Denison T6C cartridge kits displacement code:  03, 05, 06, 08, 10, 12, 14, 15, 17, 20, 22, 25, 28, 31,

2. Denison T6D cartridge kits displacement code:  08, 12, 14, 17, 20, 24, 28, 38, 31, 35, 38, 42, 45, 50

3. Denison T6E cartridge kits displacement code: 42, 45, 50, 52, 57, 62, 66, 72, 85.

7. Denison T7E cartridge kits displacement code:  42, 45, 50, 52, 57, 62, 66, 72 

Hydraulic fluid

Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.

The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.

Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.

If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).