E1 | 4E1 | E1 connector | DB37/BNC for 75ohm, RJ45 for 120ohm |
Ethernet | 4Ethernet with VLAN | Ethernet rate | 10/100M |
Default optical | with dual fiber, 40km,FC | NMS | CLI NMS |
Power | AC+DC |
Humanity RPM-150S4ET 4E1 PDH multiplexer is a point to point optical transmission device which is developed in VLSI basis. This series support optical redundancy (optical 1+1) and power redundancy (power 1+1) to ensure stable performance. It is with complete alarm monitor function, high integration, low power consumption, stable performance and easy to use.
Main Features
Single board design with 1U 19inch
1+1 optical redundancy for stable performance with the rate of 150Mbps(option)
ALS(Automatic Laser Shutdown) offered for safe installation(option)
Comply with ITU-T G.703, G.742, G.823
4 Ethernet with VLAN ports available
2channel RS232 available
Complete alarm function to monitor the remote equipment status
Order wire phone available
Full management monitor for easy maintenance
1+1 power redundancy for stable performance(option)
E1
Comply with ITU-T G.703, G.742 and G.823
HDB3 coding
Coding rate: 2048Kbps±50ppm
120ohm(RJ45) or 75ohm (BNC)
Ethernet
Comply with IEEE 802.3
Maximum 4Ethernet available with VLAN
Auto adapt 10/100M, MDI/MDIX, full/half duplex
Connector: RJ-45
Frame length: 64kbps~1916kbps
Support flow control
Order Wire Phone
Use standard 2-wire phone set
Channel: 1
Coding: PCM
Bandwidth: 64Kbps
Connector: RJ11
Optical
1+1 optical redundancy
Single/multi mode
Single/dual fiber
Wavelength: 850nm/1310nm/1550nm
Connector: FC/SC
Distance: 2km/40km/60km/120km
No.23 East An'ningzhuang Rd,Haidian District, Beijing, China