MOQ | 1 pieces |
Port | Guangzhou, China |
Packaging | Carton box |
Lead Time | 2 days |
What's the Specification Our High Frequency Radar Level Sensor?
1. Small antenna size, easy to install; Non-contact radar, no
wear, no pollution.
2. Almost no corrosion, bubble effect; almost not affected by
water vapor in the atmosphere, the temperature and pressure
changes.
3. Serious dust environment on the high level meter work has
little effect.
4. A shorter wavelength, the reflection of solid surface
inclination is better.
5. Beam angle is small, the energy is concentrated, can enhance
the ability of echo and to avoid interference.
6. The measuring range is smaller, for a measurement will yield
good results.
7. High signal-to-noise ratio, the level fluctuation state can
obtain better performance.
8. High frequency, measurement of solid and low dielectric
constant of the best choice.
Product name: |
26G radar level meter |
Casing window |
Polycarbonate |
The ground terminal |
Stainless steel |
Cable entrance / plug |
One M20xl.5 cable entrance One blind plug |
Terminal |
Conductor cross section 1.0m |
The output signal |
(4 ~ 20) mA/RS485 |
Communication protocol |
HART |
Resolution |
1.6u A |
Fault signal |
Constant current output; 20. 5mA 22mA 22mA 3.9mA |
The integral time |
(0 ~ 50) s, adjustable |
Blind area |
the ends of the antenna |
The maximum distance measurement |
70 meters |
Microwave frequency |
26GHz |
Communication interface |
HART communication protocol |
The measurement interval |
about 1 second (depending on the parameter settings) |