MOQ | 1 ton |
Port | changzhou |
Packaging | 50ml, 100ml toothpaste 350G 310ml 2.6L sticks 2KG 15KG 25KG 280KG barrels etc. |
Lead Time | 7-10days |
FEATURES OF ONE-PART ADDITION MID-TEMPERATURE CURED SILICONE RUBBER GOLOHO-4337
·One-part addition mid-temperature cured conductive silicone adhesive sealant
·Easy to use . no need to mix ,vacuum and exhaust bubble.
·Semi-flowable .
·Cures with heat to an elastomer in a short period of time .no by-product.
·Excellent adhesion sealant to Various metals ,glass, ceramics and plastics. No primer needed.
·After cured ,elastomer stable from -50°C – 250°C .
·Excellent insulation and flammable retardant .
·Excellent weatherability and temperature resistance. Non-corrosive to chemical product.
·Tolerance to UV, ozone and chemical products when outdoor use,
·Superior deep section cure .
·Superior high temperature performance. low coefficient of linear expansion
· Description
GOLOHO-4337 is a one-part, low viscosity allows for excellent flowability and non-corrosive to metal , heat curable silicone rubber designed for electric and electronic parts required high speed cured and strong tensile strength (without primer ) sealant and adhesion. This product cures with heat to form rubber.
TYPICAL PRODUCT DATA OF ONE-PART ADDITION MID-TEMPERATURE CURED SILICONE RUBBER GOLOHO-4337
Typical uncured propertie |
4337R |
4337RM |
4337RH |
4337G |
4323 |
4321 |
Appearance |
semi-flowable |
|||||
Color |
Red |
Grey |
Black |
White |
||
Adhesion rate pas(P) |
12.5(125) |
17(170) |
25(250) |
12.5(125) |
16(160) |
18(180) |
TYPICAL mechanical PROPERTIES |
||||||
Specific gravity g/ cm3 |
1.45 |
1.46 |
1.48 |
1.45 |
1.45 |
1.46 |
Hardness Type A(A) |
>38 |
>38 |
>40 |
>38 |
>38 |
>39 |
Tensile strength MPa (kgf/ cm2) |
>2.9 |
>2.9 |
>3.0 |
>2.9 |
>3.0 |
>3.0 |
Adhesive strengthMPa(kgf/ cm2) |
>1.8 |
>1.8 |
>1.5 |
>1.8 |
>1.5 |
>1.5 |
Elongation % |
170 |
160 |
>150 |
170 |
>150 |
>150 |
TYPICAL electrical PROPERTIES (CURED) |
||||||
Strength of breakdown voltage kV/mm |
>20 |
20 |
>20 |
>20 |
>20 |
>20 |
Dielectric constant 1Mhz |
<3.9 |
3.9 |
<3.9 |
<3.9 |
<3.9 |
<3.9 |
Dielectric loss 1mhz |
5×10-2 |
5×10-2 |
5×10-2 |
5×10-2 |
5×10-2 |
5×10-2 |
Volume resistivity Ω.cm |
>3.4×1014 |
>3.4×1014 |
>3.4×1014 |
>3.4×1014 |
>3.4×1014 |
>3.4×1014 |
CURE PROPERTY OF ONE-PART ADDITION MID-TEMPERATURE CURED SILICONE RUBBER GOLOHO-4337
Typical cure time and temperature
Temperature |
Cure time |
150 |
12 |
200 |
8 |
A
cure time required is subjected to heat condition, specific
application form and efficiency.
generally,
a sample test should be taken to confirm it.
TYPICAL IRON CURE TIME AND WAY OF ONE-PART ADDITION MID-TEMPERATURE CURED SILICONE RUBBER GOLOHO-4337
Typical iron cure time and way (by electricity heating)
Power(W) |
Once time(s) |
Second time(s) |
1400 |
60+<45 |
80 |
1800 |
45+<40 |
60 |
2200 |
40+<30 |
No.200, Chuangxin 2 Road, Xinbei District, Changzhou, Jiangsu