High Quality LCD Display Water Distilling Machine 4Liters Per Hour

Product Details

USE:

1. Add the water with the maximum scale water level into the tank of the main engine (do not exceed the water level).
2.Place the machine head on the main machine (check whether the sealing ring of the machine head is properly installed or leaking), insert the connecting power plug(product plug) of the machine head into the socket of the machine head, and insert the power cord plug (product plug) into the power socket of the machine head.
3.After making sure that the plug is properly connected and fastened, insert the power plug into the wall socket and display"- -" on both screens.

4.Press the START/STOP button on the display screen, the default temperature is 106 ON the left display screen, and the current temperature is displayed ON the right display screen.Stop for 1 second, the head fan starts to work, and the host enters the heating state.
5.Put the bottle inlet mouth match with the outlet mouth of the host, when the host heating about 30 minutes distilled water start drops from the host mouth slowly,it will automatic boil dry protected after the water dry up,the display shows "E1,E1", and when display "--"means the temperature go down, then to be able to add water again to start next cycle.

FEATURE:

1.Have an ON/OFF switch button, no need unplug the power code for stop the machine, easy and safety.
2.Have an Fuse Holder with 2XF10A, it will be safety when short-ciruirt.comply with the European Electrical Safety Standard.
3.Have an Manual-type 110 degree Thermostat from USA Emerson Electric Co.this kind of thermostat are precisely than most brands,make the distillation water
4.Have an good structure for fixed the Emerson Thermostat for make sure the precisely and never loose control.
5.The Whole machine power=800 W, make sure the whole machine distillate 4L Pure Water only with 3.75 Hours.

SPECIFICATIONS: