Place of Origin | Shandong, China | Brand Name | lanjiu |
Model Number | LKBS481502 | Application | E-Vechile |
Voltage | 36-48V | Product name | servo Controller |
Current | 150A | Rated Power | 2000w 3000w |
Name | Brushless Motor Controller | Type | BLDC Motor Contoller |
Usage | AGV | Brand | lanjiu |
Function 2 | High |
High power 48v 2000w 3000w 150A high precision RS232 CAN control Dual channel intelligent bldc motor servo controller
LKBS481502
LKBS481501 is an intelligent brushless DC servo controller. It adopts 32-bit high-performance MCU,Advanced motion control algorithm is suitable to the outside of the quadrature encoder input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication, CAN bus,CAN be widely used in automation.
Suitable for driving permanent magnet synchronous servo motor, low voltage AC servo motor.
motor: 24V 1500W, 48V 1500W- 4000W.
Continuous current 80A per channel, maximum peak current 160A (can be set).
DC working power +24~60V±10%.
Speed mode, torque mode, position mode (customed).
Power supply
Rated working power: 24-60VDC.
Limit power supply range: 19--65VDC.
It can provide instantaneous current overload capability of 2 times continuous current.
Feedback components
Incremental encoder (General product)
Operating environment
Operating temperature: -25~55 °C (based on ambient temperature).
Storage temperature: -35~65°C (based on ambient temperature).
Humidity: 5%--90%RH, condensation (25°C)
Protection level: IP54.
Insulation performance: input to the chassis DC600V, leakage current 0.07mA. The insulation resistance is 20 MΩ and more.
Three-proofing requirements: meet the requirements of three proofing (dust, moisture, salt spray).
Vibration requirements: frequency 5HZ ~ 25HZ, amplitude 3mm, 0.09g.
25HZ~200HZ, amplitude 1.47mm, 116g.
Parameter |
Label |
Parameter value |
unit |
Voltage |
U |
24~60 |
VDC |
Maximum continuous current |
Ic |
80 |
A |
Maximum peak current |
I max |
160 (1s overcurrent protection) |
A |
PWM switching frequency |
fPWM |
10 |
kHz |
Output encoder power supply |
+5Vout |
5 |
VDC |
I CC |
100 |
mA |
|
Digital input |
EN, DIR |
Cutoff (high level): less than 1mA Conduction (low level): 3~7mA |
mA |
Alarm output |
Open collector |
No fault: Open Fault: Close |
2A |
Analog input impedance |
Single-ended input |
20 |
KΩ |
Analog signal voltage |
Single-ended input |
0~5V |
V |
RC signal control |
Cycle 1.5ms |
Motor stop |
|
1.5ms - 2ms |
Motor forward |
|
|
1.5ms-1ms |
Motor revere |
|
|
Communication port |
RS232 |
115200 |
bps |
Custom CAN |
250 |
Kbps |
|
Encoder input |
Signal property |
5V differential drive |
|
fmax |
200 |
KHz |
|
Controllable speed range |
RPM |
500~3000 |
Rpm |
Undervoltage protection |
Vu |
19 |
V |
Overvoltage protection |
Vo |
60 |
V |
Temperature rise |
T |
75A 30min≤35K |
|
Operating temperature |
Industrial grade (standard product) |
-25 ~ +55 |
℃ |
Military grade |
-40 ~ +55 |
||
Storage temperature |
Industrial grade (standard product) |
-35 ~ +60 |
℃ |
Military grade |
-55 ~ +65 |