MOQ | 1 Liter/Liters |
CAS No. | 1111112 | Other Names | sublimation coating |
MF | Mixture | EINECS No. | ******* |
Place of Origin | Guangdong, China | Main Raw Material | Other |
Usage | Plastic Coating | Application Method | Spray |
State | Liquid Coating | Brand Name | DBX, DBX-1 |
Model Number | DBX-0106, DBX |
1)good quality and
bottom price
2)transfer coating is
suitable for metal, ceramic,glass
sublimation coating for ceramic:for hard surfact objects, like mugs, tiles, metal board etc....
This coating can be used directly. Apply to the objects surface which can resist high temperature. Such as mug/cup, Ceramic tile, glass, iron board ect. After use this coating on the objects surface you can transfer the pictures you like onto the objects.
It is suitable for in the ceramics ,glass,metal ,wooden,stone,plastic and oth er hard materials to do the sublimation transfer printing coat:
1) Use alcohol to
clean the objects surface.
2) Use brush to apply
coating on mug uniformly
3) Or just soak into
coating liquid. Spray is another choice to apply on
it
4) Leave the mug in
anti-dust cabinet till liquid stop running and fully
dried
5) Pre-heat the oven
into 220 centigrade, and then put the objects in and bake it
for 20 minutes. Baking time can be adjusted according to real
condition.
6) Now its done, you
can go the image transfer procedure.
The products may spraying, coating, crushed James, Brush and other methods of construction. Lean Construction materials : benzene, esters, alcohols, ethers and other rare materials mixed solvents. Viscosity : construction technology requirements may be adjusted by adding an appropriate amount of rare material. If immersed in a beaker 2 coatings generally adding 1.1-1.4 xylene or toluene or 100 copies of 'rare and 0.72% respectively a gainst the use of solvent oil
Attention:
1). glass
,metal ,ceramic or other flat objects ,can be pressed under
220-225 centigrade (degree)with 30-40
secends.
2).
pvc ,eva cards and other materials doesnot withstand high
teperatures ,you can put a wet cloth underside before pressing
,to prevent deformation after pressing,you should place the
objects on the slad with heavy and get until it cooling
off.
3)Dry the coated goods in nature and don't touch them until they are dry,then put them into the over 200 centigrade constant temperature for about 10 minutes,then take then out and transfer the pictures on them.
Our factory is professional in heat transfer vinyl , transfer paper, sublimation printing machine,
heat transfer printer machine, inktec sublimation ink , our products is good quality and hot sale in the world.
the advantage of our products:
1) some of them are free sample
2) short delivery time
3) Bottom price& high quality
4) good after-service
5th Floor, 15th Yongning North Street, Dashi river village, Panyu District, Guangzhou City, Guangzhou,China (Dashi MTR Station Exit D)