Glow Powder and luminous powder for textiles printing

Name: Glow Powder and luminous powder for textiles printing
Brand: Unicor
SKU: Tradewheel_2044373
Availability: InStock

FOB Price 5 - 50 USD / KG

Photoluminescent pigment Application Case

Photoluminescent pigment Use Instructions:

1. For the luminous powder, the customer should choose the soft and small particles of granularity .

2. For the injection machine, the customer should choose old and short screw (0.8 m was preferred) .

3. Manual re-mix the pigments preferred, avoid to use the machine.

4. During the injection molding, try the best to lower the temperature and pressure.

5. Finally, the proportion of luminous powder during the injection used in general 3%-10%,customers can use the

different percentage base on the luminous brightness and cost, but suggest the percentage not more than 10%.

For Injection molding products are as below:

MODEL	GLOWING COLOR	GLOWING TIME (Hour)	PARTICLE SIZE (um)	AFTERGLOW INTENSITY			USAGE
				1min	10min	60min	Injectionmolding,Artifact,Ceramic,Printing, Mosaic,Ink and paint
JPG-364	Yellow-green	8-10	50-75um	4515	481	47
JPG-366		8-10	30-50um	2756	317	34
JPG-384		8-10	50-75um	6637	1145	170
JPG-386		8-10	30-50um	4976	721	100
JPG-388		8-10	10-30um	3611	498	69
JPG-394		12	50-75um	7575	1167	169
JPG-396		12	30-50um	6768	1047	115
JPG-398		12	10-30um	5217	770	102
JPG-494		12	50-75um	8711	1342	184
JPG-496		12	30-50um	7783	1024	142
JPG-498		12	10-30um	6350	886	116
JPB-394	Blue-green	8-10	50-75um	4840	950	115
JPB-396		8-10	30-50um	2766	493	66
JPB-398		8-10	10-30um	2694	480	61
JPA-384	Azure	8-10	50-75um	2667	533	90
JPA-386		8-10	30-50um	972	156	22
JPA-388		8-10	10-30um	948	146	20