GLOAZURE FABRICATED STEEL INSULATORS will safely support carrier
pipes of any diameter in steel, cast iron or concrete casings and
can, if required be desired to accurately centralize the pipe
within the casings.
The INSULATOR is fabricated from high grade 14 SW gauge(2.0mm)
steel and is either coated with high grade
PVC to a thickness of approximately 15 mils(0.4mm) or zinc plated
dependent upon customers requirement.
Skids of high density polyethylene are used and these are solid
injection moldings capable of withstanding in excess of 25 tonnes
and temperatures of 120°C (250°F).
Each skid is fixed to the INSULATOR by two welded
studs.
The skids will suit most types of applications and load
requirement, and are available in two thicknesses, 19mm and
38mm.
When there is a large differential between carrier pipe and
sleeve size, INSULATORS with skid resers are supplied to either
accurately centralise
the pipe within the casing or radius to customers'
requirements.
The skid riser is fabricated from 10 SWG(3.2mm) steel and has
supporting gussets on 600mm carrier pipe and
over.
INSULATORS provide triple electrical insulation between the
carrier pipe and sleeve: plus
(a) Pipe Coating
(b) High duty plastic coating of all steel components (where
applicable)
(c) Insulated skids.
GLOAZURE FABRICATED STEEL INSULATORS are available in any
standard size up to 1050mm diameter and can be made to customers
special requirements in greater diameters if
required
For easy and speed of installation the INSULATORS come in two
semi-circular halves which are clamped together by zinc plated or
galvanized bolts which are supplied with each
INSUALTOR.