Major features and benefit:
Futronic's FS80H USB2.0
Fingerprint Scanner uses advanced CMOS sensor technology and
precise optical system to deliver high quality fingerprint image.
It can capture an almost un-distorted raw fingerprint image into
PC in 100ms. So it is good for any fingerprint recognition
application.
Its finger scanning window is a
crown glass with a thickness of 14mm. So it is much more reliable
and robust compared to any semiconductor type fingerprint
sensor.
The finger is illuminated by 4
infra-red LEDs during scanning and the light intensity is
automatically adjusted according to scanning fingerprint's
characteristics (wet, dry, blurred, etc) to optimize the quality
of the captured fingerprint image.
Special electronic circuit is
built into FS80H to do Live Finger Detection (LFD). That is, with
appropriate software in PC, user can select this LFD feature so
that only live finger's fingerprint will be scanned into PC. Fake
fingers made from silicone rubber, play-doh, etc, will be
rejected. And the LFD feature is included in all Futronic's
standard software.
Specification
:
- Fingerprint scanning window
size is 16x24mm
- Image resolution is 320x480
pixel, 500 DPI
- Image format is 8 bit 256
grayscale.
- Raw fingerprint image file
size is 150K byte
- With Live Finger Detection
(LFD) feature
- USB 2.0 compatible interface,
plug and play device. WHQL approved for Vista 32&64
bit.
Small size, 64 x 48 x 27
mm
Ø-
With a 2M standard USB cable
- Light weight, 120g
- Operation temperature: -10 to
+55 C
Electrical
characteristics
- Light source:
Infrared LED
- Supply
voltage: DC 4.5-5.5V via USB port
- Power
consumption:
- Active<700mW(during finger
scanning),
- Standby< sleep
moden200mW,
<2.5mW
- SD Contact
:
- 8KV no permanent damage Air
discharge - 16KV no permanent damage
502 Ashwamegh Alegance Nr. Parimal gardan Kalyan jewellers lane hudarpura road, Ambawadi