Port | shenzhen |
Lead Time | 15days |
Ftth 1 Ge Epon Onu Gpon Ont With Realtek Chipset For Huawei Fiberhome OLT
Product descriptions:
1GE GPON EPON ONU is designed for ONU in deferent FTTH solutions
, The carrier-
class FTTH application provides date service access. It adopts
high-performance and low-consumption chips, and supports CTC 2.0
interconnection and interworking standard of China Telecom. With
the help of NGBN View NMS, it can provide subscribers with
abundant services, and totally meet the needs of carrier-class
FTTH devices. It is designed by Realtek chipset.
GPON ONT designed for fulfilling FTTH ultra-broadband access request of home and SOHO users. It is based on the stable and mature GPON technology, which has high performance/price ratio, and the technology of layer 2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed QoS, and fully compliant to ITU-T G.984 GPON standards.
Main features:
Router mode supports PPPoE/DHCP/ static IP
Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah Standard
Up to 20KM transmission Distance
Support data encryption, group broadcasting, port Vlan
separation, etc.
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote upgrade of
software;
Support VLAN division and user separation to avoid broadcast
storm;
Support power-off alarm function ,easy for link problem
detection
Support broadcasting storm resistance function
Support ACL and SNMP to configure data packet filter flexibly
Specialized design for system breakdown prevention to maintain
stable system
Support software online upgrading EMS network management based on
SNMP ,convenient for maintenance.
Technical Datasheet:
Item | Parameter | |
Interface | PON Interface |
1 GPON optical interface Meet CLASS B+ standard SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate1.25Gbps split ratio:1:64 Transmission distance 20KM |
User Ethernet Interface |
1*10/100/1000M auto-negotiation Full/half
duplex mode RJ45 connector Auto MDI/MDI-X 100m distance |
|
Power Interface | 12V DC Power supply | |
Performance Parameters | PON Optical Parameter |
Wavelength: Tx 1310nm, Rx1490nm Tx Optical
Power: -1~4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm Connector Type: SC Optical Fiber: 9/125 single-mode fiber |
Data Transmission Parameter |
PON Throughput: Downstream 950Mbps;
Upstream 930Mbps, 1000Mbps Packet Loss Ratio:<1*10E-12 latency: <1.5ms |
|
Gateway |
Router mode supports PPPoE/DHCP/ static IP
WAN support Route rand Bridge mode WAN support Internet,VoIP,IPTV,TR069 LAN supports DHCP and static IP Support NAT and NAPT Support UPnP |
Product pictures: