The flour mill mesh is specially designed fabrics for plansifter screen which for classifying the milled product in the milling industry. It’s a sieve bolting cloth weaving by FDA & EU food grade Nylon or Polyester, monofilament or double-filament yarn in precision micron apertures.
The plansifter screen mesh plays a crucial role in the milling industry, which decides the balanced and stable flour quality.
Nowadays, the Nylon (PA) and Polyester (PET) mill mesh fabrics are most widely used.
Sifting Fabrics | Machines | Area of use | Main benefit | Standard use for | ||
Sifters | Centrifugal Sifters | Purifiers | ||||
PA-GG | × | × | Coarse sifter covers | Anti-abrasive qualities | Coarse sieves | |
PA-Milling | × |
Soft wheat, biscuit and rye flour |
High efficiency | Flour sieves | ||
PA-Milling Forte (MF) | × | Good lifetime and efficiency | ||||
PA-XX | × | × | Soft wheat, biscuit and rye flour | Long lifetime, high efficiency | ||
PA-HD(XXX) | × | Durum and hard wheat flour | Strongest fabric | Centrifugal sifter | ||
PET-GG | × | Purifier covers | Constant tension | Purifier |
FLOUR MILLING MESH PA-GG | ||||||
Specification | Mesh Opening | Thread Diameter (um) | Base (cm) | Mesh count (mesh/inch) | Open Area(%) | Square Meter/g |
10GG | 2000 | 550 | 3.9 | 9.9 | 61.5 | 237.3 |
12GG | 1800 | 450 | 4.4 | 11.2 | 64.0 | 180.0 |
14GG | 1600 | 400 | 5.0 | 12.7 | 64.0 | 177.8 |
15GG | 1400 | 400 | 5.6 | 14.2 | 60.5 | 197.5 |
16GG | 1300 | 350 | 6.1 | 15.5 | 62.1 | 165.0 |
18GG | 1188 | 350 | 6.5 | 16.5 | 59.7 | 177.0 |
19GG | 1080 | 350 | 7.0 | 17.8 | 57.0 | 190.4 |
20GG | 1000 | 300 | 7.7 | 19.6 | 59.2 | 153.8 |
22GG | 950 | 300 | 8.0 | 20.3 | 57.8 | 160.0 |
24GG | 850 | 300 | 8.7 | 22.1 | 54.6 | 173.9 |
26GG | 800 | 300 | 9.1 | 23.1 | 52.9 | 181.8 |
27GG | 750 | 250 | 10.0 | 25.4 | 56.3 | 138.9 |
28GG | 710 | 250 | 10.4 | 26.4 | 54.7 | 144.7 |
30GG | 670 | 250 | 10.9 | 27.7 | 53.0 | 151.0 |
31GG | 610 | 250 | 11.6 | 29.5 | 50.3 | 161.5 |
32GG | 600 | 250 | 11.8 | 30.0 | 49.8 | 163.4 |
34GG | 560 | 220 | 12.8 | 32.5 | 51.5 | 137.9 |
36GG | 530 | 220 | 13.3 | 33.8 | 49.9 | 143.4 |
38GG | 500 | 220 | 13.9 | 35.3 | 48.2 | 149.4 |
40GG | 475 | 200 | 14.8 | 37.6 | 49.5 | 131.7 |
42GG | 450 | 200 | 15.4 | 39.1 | 47.9 | 136.8 |
44GG | 425 | 200 | 16.0 | 40.6 | 46.2 | 142.2 |
45GG | 400 | 180 | 17.2 | 43.7 | 47.6 | 124.1 |
47GG | 375 | 180 | 18.0 | 45.7 | 45.7 | 129.7 |
50GG | 355 | 150 | 19.8 | 50.3 | 49.4 | 99.0 |
52GG | 335 | 150 | 20.6 | 52.3 | 47.7 | 103.1 |
54GG | 315 | 150 | 21.5 | 54.6 | 45.9 | 107.5 |
56GG | 308 | 150 | 21.8 | 55.4 | 45.2 | 109.2 |
58GG | 300 | 150 | 22.2 | 56.4 | 44.4 | 111.1 |
60GG | 280 | 150 | 23.3 | 59.2 | 42.4 | 116.3 |
62GG | 275 | 150 | 23.5 | 59.7 | 41.9 | 117.6 |
64GG | 265 | 150 | 24.1 | 61.2 | 40.8 | 120.5 |
66GG | 250 | 120 | 27.0 | 68.6 | 45.7 | 86.5 |
68GG | 243 | 120 | 27.5 | 69.9 | 44.8 | 88.2 |
70GG | 236 | 120 | 28.1 | 71.4 | 43.9 | 89.9 |
72GG | 224 | 120 | 29.1 | 73.9 | 42.4 | 93.0 |
74GG | 212 | 120 | 30.1 | 76.5 | 40.8 | 96.4 |
Remark: The above data is theoretical and for your reference only. |
——
FLOUR MILLING MESH PA-XX | |||||
Spec. | Mesh Opening(um) | Thread Diameter(um) | Tram Silk (um) | Warp/weft (cm) | Open Area(%) |
3xx | 300 | 100+2*60 | 100 | 24.0/25.0 | 54 |
4xx | 280 | 100+2*60 | 100 | 25.5/26.5 | 53 |
5xx | 250 | 100+2*60 | 90 | 27.5/29 | 51 |
6xx | 214 | 90+2*60 | 90 | 32/34 | 49 |
7xx | 199 | 80+2*60 | 80 | 33/36 | 48 |
8xx | 181 | 80+2*60 | 70 | 36/40 | 46 |
8.5xx | 160 | 70+2*60 | 70 | 40/43.5 | 44 |
9xx | 146 | 70+2*60 | 64 | 43/48 | 44 |
9.5xx | 140 | 60+2*60 | 60 | 43.0/50.0 | 43 |
10xx | 130 | 60+2*50 | 64 | 49/52 | 44 |
10.5xx | 125 | 60+2*50 | 60 | 48.5/54.0 | 40 |
11xx | 120 | 60+2*50 | 48 | 53/60 | 42 |
12xx | 112 | 60+2*50 | 48 | 55/63 | 40 |
12.5xx | 106 | 60+2*43 | 48 | 56.0/64.0 | 40 |
13xx | 100 | 60+2*50 | 48 | 58/68 | 58 |
14.5xx | 90 | 50+2*43 | 50 | 62.5/71.5 | 37 |
15xx | 88 | 50+2*43 | 48 | 65/74 | 34 |
17xx | 80 | 50+2*43 | 43 | 68.0/81.0 | 35 |
20xx | 75 | 50+2*43 | 43 | 70.0/84.7 | 34 |
21xx | 71 | 50+2*43 | 43 | 74.0/87.7 | 33 |
25xx | 63 | 43+2*43 | 43 | 78.0/94.0 | 30 |
Remark: The above data is theoretical and for your reference only. |
——
FLOUR MILLING MESH PA-XXX | |||||
Mode | Mesh Opening(um) | Thread Diameter (um) | Thickness (cm) | Mesh Count | Open Area(%) |
3xxx | 301 | 140 | 22.7 | 57.6 | 47 |
4xxx | 280 | 140 | 23.8 | 60.5 | 44 |
5xxx | 257 | 120 | 26.5 | 67.3 | 47 |
6xxx | 213 | 120 | 30 | 76.2 | 41 |
7xxx | 203 | 120 | 31 | 78.74 | 39 |
8xxx | 182 | 100 | 35.5 | 90.17 | 42 |
8.5xxx | 163 | 100 | 38 | 96.52 | 38 |
9xxx | 154 | 90 | 41 | 104.14 | 40 |
9.5xxx | 143 | 90 | 43 | 109.22 | 38 |
10xxx | 133 | 80 | 47 | 119.38 | 39 |
10.5xxx | 124 | 80 | 49 | 124.46 | 37 |
11xxx | 120 | 80 | 50 | 127 | 36 |
12xxx | 112 | 70 | 55 | 139.7 | 38 |
12.5xxx | 105 | 70 | 57 | 144.78 | 36 |
13xxx | 99 | 70 | 59 | 149.86 | 34 |
14xxx | 97 | 70 | 60 | 152.4 | 34 |
15xxx | 92 | 60 | 66 | 167.64 | 36 |
16xxx | 95 | 50 | 69 | 175.26 | 43 |
17xxx | 91 | 50 | 71 | 180.34 | 42 |
Remark: The above data is theoretical and for your reference only. |