FLAME 60A 12S Electronic Speed Controller (ESC)

Product Details

Product Description

This ESC is specially designed for multi-rotors.

1. Start-up Protection: The T-MOTOR ESC will shut down the motor when it fails to start the motor normally in 2 seconds by increasing the throttle value. In this case, you need to move the transmitter throttle stick back

to the bottom position and restart the motor.(Possible causes: poor connection or disconne-ction between ESC and motor wires; propellers are blocked etC.)

2. Throttle Signal Loss Protection: When the ESC detects loss of signal for over 0.25 second, it'll cut off the output immediately to avoid greater loss which may be caused by the continuous high-speed rotation of propellers or rotor blades. ESC will resume the corresponding output when normal signals are received.

3. Motor Lock-up Protection: The ESC will try to restart the motor (thrice) when motor lock-up is detected; if it fails, it will cut off the output and stop attempting. To restart the ESC and resume its output,

you need to push the throttle stick to the bottom position and then start again.

4. Over-load Protection: The ESC will cut off its output immediately when the peak current gets close to 340A (short-circuit current). Please regain its normality by powering it on.

Thanks for purchasing our Electronic Speed Controller (ESC). High power system for RC model can be very dangerous. Any improper use may result in injury and damage to human and devices. We strongly recommend that you read this manual carefully before use, and abide by its rules.