FALLING FILM EVAPORATOR

Product Details

Falling film evaporator china means that the feed liquid is added from the upper tube box of the heating chamber of the falling film evaporator and distributed evenly to each heat exchange tube through the liquid film forming device. Under the action of gravity, vacuum induction and air flow, the feed liquid flows uniformly from top to bottom. During the flow, the shell side heating medium is heated and vaporized, and the vapor and liquid phase enter the separation chamber of the evaporator together. After vapor-liquid separation, the steam enters the condenser for condensation (single effect operation) or enters the lower effect evaporator as the heating medium, so as to realize multi-effect operation, and the liquid phase is discharged from the separation chamber.

Advantages of SUNKAIER Falling Film Evaporator

Short residence time, not easy to cause material deterioration, suitable for handling heat-sensitive materials.

Since process fluids flow by gravity rather than being propelled by high temperature differential evaporation, low temperature differential evaporation can be used.

With small liquid retention, the falling film evaporator in china can operate according to changes in energy supply, vacuum degree, feed volume, concentration, etc.

The heat transfer coefficient is higher because the solution flows as a film in the single-way evaporator.

The feed liquid of the falling film evaporator is added from the top of the evaporator and falls down the tube wall in a film under the action of gravity, evaporating and thickening in the process, and obtaining a concentrated liquid at its bottom. Falling film evaporator can evaporate the material with high concentration and high viscosity.

Typical Applications of SUNKAIER Falling Film Evaporator

As a falling film evaporator company, falling film evaporator distributor, falling film evaporator manufacturer, falling film evaporator supplier, falling film evaporator factory, SUNKAIER’s falling film evaporator is used for evaporation and concentration of water or solution in food, chemical, light industry and other industries, and can be used for waste liquid treatment in the above industries. It can also be used for evaporation of xylose, starch sugar, oligosaccharide and other aqueous solutions at low temperature.

If you want to know more kinds of chemical manufacturing equipment, please visit our website.