Factory Direct Supply 12v 100ah deep cycle lithium ion battery for low temperature area

FOB Price 160 - 162 USD / Pieces

MOQ	1 Piece
Port	Shanghai, Shenzhen, Ningbo.
Lead Time	1-400 Pieces about 15 days, 400 above to be negotiated.

Quick Details (View All)

Brand Name	Haidesen	Model Number	Lithium Battery
Place of Origin	Jiangsu, China	Weight	13 Kg
Warrenty	3 Years	Application	Solar street light
Long working life	>10Years	Low Self-discharge rate	≤3%/Month
Widen operation temperature rate	-50℃~55℃	High sealed reaction efficiency	≥99%
Battery type	Lithium battery	Battery Color	Customized
Product name	12v 100Ah deep cycle lithium ion battery for low temperature	Sealed Type	Sealed
Maintenance Type	Free	Certificate	UL, ce, TUV
Usage	Solar street light	Single gross weight	14.000 Kg
Single package size	400X320X140 cm

Product Details

1. What is the definition of "cycle use" and "standby use"?

"Cycle Use" - direct power source:

Cycle Use It can provide the power supply to power tools,
and portable electronic products. It can also be used for
cycling

charging and discharging usage such as electronics
motorbike or vacuum cleaner.

"Standby Use" - back up power:

Standby Use is mainly used for emergency power to avoid
future damage that may be caused by a sudden power
outage.

2. What are the concerns when using OLITER batteries in a parallel or a serial series?

(1) Do not mix brands, models and date codes.

(2) No separate discharge then charging in a serial
configuration.

(3) Under parallel usage, pay close attention to the
differences in voltage in each circuit.

(4) If the difference in voltage in each circuit is too
high, do not charge/discharge as parallel.

(5) The environment of all circuits must be
similar.

3. How can you check a battery's performance?

Different usage applications will use different methods
for evaluating a battery's performance. Using a 20 hour
rate or the 10 hour rate, you can use 0.05CA or 0.1CA to
discharge the battery until the battery reaches a
terminal voltage of 10.25 volts. You can then calculate
the amp hours to see if the battery fits the
specifications or not. For a 5 minutes rate, such as the
HC1221W, you can use a 21 watts/cell discharge till the
terminal voltage reaches a terminal voltage of 9.6 volts
and then measure the discharge time to see if it meets
the final specifications or not.

4. How can the conversion be made between "watts (W)" and "amp hours (Ah)"?

W=I x V = 4I (15 minute rate) = 2CV = 2V

(Ex. HC1217W = 17/4 = 4.25Ah)

5. When should a deep-cycle battery be used?

Deep cycle batteries are used when 50% or more of the
capacity is used per cycle.


The most common use of deepcycle batteries is in
applications that require deep, repetitive drain, like
powerful car audio

systems, trolling motors, golf carts, electric
wheelchairs, or RV house power sources. Public safety
and high-performance vehicles are other applications
that call for the special characteristics of deep-cycle
batteries.

6. Does the deep-cycle battery have a "memory"?

No. The performance of deep-cycle batteries will be
reduced over time, but deep-cycle batteries do not suffer
from "memory effect"

such as NiCd batteries do.

7. How are batteries rated?

Lead acid batteries are rated based on a capacity given
in a defined time. There is not a set industry standard
for how to rate a battery.

8. How long can a battery last?

The service design life of a battery varies considerably
with how it is used, how it is maintained and charged,
temperature, among other factors.

9. Do I need to add water to my battery?

No. Sealed lead acid batteries do not require the use of
water.

10. What determines the life of a VRLA battery?

Sealed lead acid battery life is determined by many
factors. These include temperature, depth and rate of
discharge, and the number of charges and discharges
(called cycles).