MOQ | 1 set |
Port | Shanghai |
Packaging | Plywooden Case or in 1 x 20ft container |
Lead Time | 50-90 days |
Power | 380V/400V/440V, etc. |
enviClone Photovoltaic PV Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine
Specification
Model No. | EVCL-DML-2200, EVCL-DML-2600 |
Max Dimensions of Tested PV Module Panel | 2200 mm x 1200 mm, 2600mm x 1300mm, etc. |
(Dimensions can be customized) | |
Quantity for each test | 1 Piece of PV Module |
Pressure Method | Pneumatic Cylinders |
Quantity of Pneumatic Cylinders | 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) |
Quantity of Pressure Sensors | Each pcs for each pneumatic cylinder |
The Max Pressure can be tested | 12,000 Pa |
The Max Pulling Force can be tested | 7,500 Pa |
Accuracy Deviation | ≤3% |
Deformation Sensor | 1 (or customized as per requirement) |
Controlling Method | Siemens PLC + HM1 |
Drive Method | Air Compressed |
Load Amplitude Test Range (Static) | Pressure: +500~12,000 Pa (Continuous, adjustable) |
Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjusted during the test every time. | |
Load Amplitude Test Range (Dynamic) | Pressure: -2,500 Pa ~ +2,500 Pa |
Suction: -500 Pa ~ -7,200 Pa | |
Frequency: 3~7 times / min | |
Accuracy Deviation: ≤ ±50 Pa. |
Note: specifications can be customized as per other test standards or requirement.
Enviclone's PV modules Dynamic Mechanical Load (DML) Test Machine simulates the dynamic load with the pneumatic cylinders and suction cups. Each pneumatic cylinder drives one suction cup, and each cylinder rod is equipped with one tension pressure sensor. Each pneumatic cylinder is a separate control module. Periodic load stress test is performed on the Photovoltaic (PV) Modules’ surface, and PV Modules can be installed according to different requirements. The system also has the ability to monitor the curvature of the PV Module’s center points in real time.
Test Standards
Contact
For further information or a quotation of pv module dynamic test machine, kindly contact enviClone by sending your email message in our form on the Contact Page. With following information please:
Dynamic Mechanical Load (DML) Test standards or requirement
21th Lihu Tech Center, No.11 Wuhu Street, Binhu, Wuxi, Jiangsu, China