Port | istanbul |
Packaging | Box |
Lead Time | 10 working days |
ECC | PCSİR |
ELECTRONIC CORROSION CONTROL
That keeps your Vehicle Rust free for years.
Rust is natural result of our environment. Your
new vehicle will be exposed to environmental conditions that
accelerate the rusting process. We can help control rust by
employing the scientific principles and technologies found
in ecc.
This device
loads a small static charge into the entire auto body -
interfering with the rust and corrosion process in areas that
have lost their protective paint coatings. A similar approach has
reduced corrosion for years on underground pipelines, naval
vessels and oil industry installations.
ecc Electronic Corrosion Control protects your cars against rust using the most advanced electronic technology. It is an alternative to the coating method of inhibiting rust. It is entirely different and feasible, its technology is based on the ability of an automobile to create and maintain a degree of capacitance through the use of ecc electronic unit. For the light and heavy industry the ecc System applies. It is capable of protecting up to 40 square meters of painted sheet metal. It is possible to protect smaller area such as refrigerator, washing machine or a vending machine. The diversity of the Heavy Industrial System allows for infinite application possibilities.
Since automobiles are produced totally coated with di-electron barrier of paint, the need to protect break in these coatings is significant importance. As the ecc unit goes through its cycling procedure, it forces the impressed electrons to escape at every 8 to 10 seconds, ecc literally pumps excess electrons into the vehicle body creating a condenser effect between the car body and the ecc anodes. The electrons repel each other resulting in their desire to return to a more positive home i.e. the anodes and the atmosphere where oxygen has a natural desire to couple with these electrons. As these impressed electrons escape from the automotive body through breaks in the di-electric coating, they interfere with the rusting process and retard the rusting at local sites.
Benefits:
Paint Sealant Protection:-
Durable long lasting protection enjoy a deep shine without waxing
Plastic like shield to protect and beautify clear coat finished
Ultra violet barrier helps prevent oxidation and fading from the sun's harmful rays
Water "sheet" from the paint surface to reduce water spotting or etching
Rust inhibitor body panel protection
Interior protection
Protects your car body inside-out and out-in. 100% of sheet-metal Protection!
Consumes 23ma, less current than your car clock!
Transferable to your next car!
1 Years limited warranty!
Installation Procedure:
The ecc is very easy to install. The installation manual comes with the unit. It has 3 wires.
1. Install the module near the battery under the
hood.
Clean the surface with cloth.
Remove the back side sticker cover from Module & past it on Vehicle body.
2. The Red wire
connects to the Battery Positive pole (+).
3. The Black wire connects to the Battery Negative pole
(--).
4. The Gray wire connect to the car body.
The module are installed by simply peel and paste on type with 3M (VHB) Very High Bonded Tapes and the installation harness are all supplied with the unit.
Specifications:
Input Voltage: 12 Volt DC
Ground: (-) Negative
Current Draw: 0. 30 ma
Anode Composition:
"ECC™ Capsules" non-sacrificial
Command Module Size:
Anode: 50mm X 50 mm
Weight: 230g
Emitting Frequency 2HZ / second
ECC is one of a kind and substantially extends auto body life through “Electrolyte capacitive discharge oxidation interference” (ECDOI), a form of impressed current technology.
The ECC ® Rust Control module attaches to your regular car battery and draws about as much current as your cars clock. Over every 8 second cycle it emits a surge of "free" electrons throughout your vehicle to the very places your car has lost its protective paint and coatings (through stone chips, scratches, and abrasions) and "shields" these exposed areas from harm. The charge is too small to be noticed, however the free electrons interfere with the rusting process and retard rust and corrosion significantly.
ECC is one of a kind and substantially extends auto body life through “Electrolyte capacitive discharge oxidation interference” (ECDOI), a form of impressed current technology.
The ECC electronic rust protection system is designed to operate in the automotive environment. Its sophisticated electronics generate a protective electron field within the metal fabric of the vehicle. This protective field disrupts the normal rusting process by generating readily available free electrons, which in the rusting process are taken, leaving the steel intact.
The ECC Rust Control module consists of a black color module with
1 anode wire.
2 flashing LED’s Red & Blue that indicate the product is functioning correctly.
Over voltage safety Fuse.
Black & Read Battery wires
Cirpici Mah/ Prof/ Turan Gunes Cad/ N/153 Zeytinburnu Istanbul