MOQ | 10 Ton |
Port | Tuticorin |
Packaging | 2.5 Kg Packing |
Lead Time | 30 DAYS |
GALO - E6013 Electrodes produce a soft arc with minimal spatter, offer moderate penetration and have an easily-removable slag.
GALO-E7018 electrodes contain a thick flux with high powder content and are one of the easiest electrodes to use. These electrodes produce a smooth, quiet arc with minimal spatter and medium arc penetration. Many welders use E7018 electrodes to weld thick metals such as structural steel. E7018 electrodes also produce strong welds with high impact properties (even in cold weather) and can be used on carbon steel, high-carbon, low-alloy or high-strength steel base metals.
ER70S-6 MIG
Wire is the most common type of welding consumable for welding
mild steel and these
wires are designed to meet minimum tensile strength requirements
of 70,000 psi. This wire incorporates the proper deoxidizer to
absorb oxygen so that it vaporizes into the arc or forms as scale
oxides. ER70S-6 is better for creating a smooth transition from
the weld to the base metal, also known as wash-in or tie-in.
Better wash-in may be a requirement in applications subject to
fatigue. ER70S-6 wire can provide better wetting at the weld toe
when compared to an ER70S-3 wire.
A quality MIG wire is critical
in robotic welding applications.
Flat and Round Stitching Wires are also being manufactured in our Plant and these are widely being used for stitching cardboard carton/boxes in stitching paper notebooks, books, paper boxes etc.