MOQ | 1 meter |
Port | Guangzhou |
Packaging | plywood case |
Lead Time | 15days |
The Floor Mounted Lab Bench is cabinet units support worktop, and the cabinet units are fixed by connecting rods.This kind of structure has good load-bearing performance, and the load-bearing capacity can reach 500KG/㎡, which can meet the use requirements of large-scale precision instruments&equipment in the laboratory.Cabinet unit is in direct contact with the ground to prevent dust from entering the bottom of the workbench, which is the first choice for dust-free laboratories.Remarks: The Floor Mounted Lab Bench is only suitable for all-steel cabinet units. If use wooden cabinet units, it will be damp and expand and deform when it touches the ground.
(1) Cabinet: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epoxy resin, cured at 220℃ high temperature. and the surface is smooth, with a thickness of up to 1.15mm~1.2mm. The cabinet door is double-layered inside and outside, filled with sound insulation material.
(2) Connecting rod: The whole adopts 40*60*1.5mm thick high-quality cold-rolled rectangle tube, the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epoxy resin, cured at 220℃ high temperature, and the surface is smooth.
(3) Handle: Non-welded One Line Handle/C-shaped handle/insertion Aluminum alloy handle.
(4) Rail: DTC 16-inch three-section silent rail.
(5) Hinge: DTC 105°/175° buffer hinge/stainless steel hinge.
(6) Footing: Use laboratory-specific adjustable feet with an adjustment range of ≥35mm, strong bearing capacity, the balance of the Lab bench can be adjusted.
Room C202, 2nd Floor, No. 97 Gaopu Road, Tianhe District, Guangzhou