digital intelligent remote / split type digital water flow meter electromagnetic flow meter

Product Details

Feature

Size DN6 to DN3000 pipe line

Suitable for all conductive liquids

No moving parts

Near zero pressure drop

Wide range in electrode:SS316,Ti,HC,HB,Tan,Pt

Multi-choice in flange:DIN,GB,ANSI,JIS,etc

Various liner materials are available:PTFE, FEP,PFA,F46, Rubber Wide rang in communication:RS485,RS232,Modbus,Hart,GPRS Automatic dual flow range capability

High accuracy: ±0.5% of reading standard or ±0.2% of range

IP68 protection class is for remote type

Application

Sewage Treatment Plants.

Food & Beverage industry

Pulp & Paper.

Chemical & Fertilizers.

Sugar Industry.

Dyeing and Printing Textiles

Steel & Aluminium.

Water Supply Schemes.

Corrosive Liquids.

Pumps & Valve Calibration Lab

Measurement Principle

The measuring principle of the electromagnetic flowmeter (Magmeter) is based upon the Faraday’s Law of.Electromagnetic induction; whereby a voltage is induced by an electrical conductor passing through a magnetic field.The following equation is applicable to the induced voltage: U = kBVD where,U Induced voltage,k Instrument constant,B Magnetic field strength,V Velocity of the conductor,D Conductor widthIn electromagnetic flowmeter, the medium acts as the electrical conductor when flowing through the meter tube,the induced voltage is proportional to the average flow,velocity (the faster the flow rate, the higher the voltage).The induced voltage is picked up by a pair of electrodes (mounted in the meter tube) and transmitted to a flow transmitter to produce various standardized output signals.Using the pipe cross-sectional area, the flow volume is calculated by the transmitter.

For before-sales advice

In order to recommend you the most suitable our electromagnetic sensor , please show us following necessary information according to your practical situation.

1.What is your measuring medium ? Conductive liquid or slurry

2.Working pipe size? 6-3000mm

3.Install type? Flange ,inserted,Threaded, Clamped.

4.Electrode material? SS316,HB,HC,Ta,Ti,Pt

5.Liner material? PTFE,rubber,neoprene,FEP,PFA,polyrethane

6.Communication mode? RS485, Modbus, RS232 ,Modbus, HART, Profibus, GPRS, others

For after-sales service

We promise to deliver the following after-sales service:

1.Warranty: The warranty period is 12 months starting from the shipping date;

2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;

3. For on-site services not arising from manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges incurred such as travel expense;

4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.

Production process

Packaging

Application cases

More products

Contact us