Port | yantian |
Packaging | Original Standard carton box packing |
Lead Time | 48hours shipping after get payment |
Feature
SF600Plus is high speed "in System Programming" programmer to
update the SPI Flash soldered on board (In Circuit Programming)
or in the socket adaptor (Offline programming). The programmer is
easily controlled by the computer DediProg Software through the
USB bus offering a friendly interface and powerful features to
users.
SF600Plus combines the advantages of SF100 with additional
improvements: High-speed USB and higher SPI performances.
SF600Plus is an upgrade version of SF600. The main difference is
that SF600Plus embeds an 8GB memory, which allows standalone
programming.
Highlights
USB High speed and high SPI performance, support up to 2Gb SPI
Flash
In-Circuit Programming: Program on board SPI Flash
Off-line Programming: Program SPI Flash in the socket
Start button feature: Able to Batch in the USB mode
Standalone mode: Support Start button programming and IO Port
programming.
ISP Port supports 2 CS pins to program two Serial Flash
memories
Signal conflict protections
Multi-Programmers Capability through USB
Support 1.8V low voltage IC
Support Windows 2003 and above
Support both 32 and 64 bit OS
High performance (25MHz, Single IO)
USB Mode Reference IC Density (Program + Verify)
Memory size W25X80VSSIG 8Mb 9s
W25Q16VSSIG 16Mb 11.6s
W25Q32VSSIG 32Mb 12.6s
W25Q64FVSSIG 64Mb 31s
W25Q128BVFIG 128Mb 61.7s
W25Q256FVFIG 256Mb 89.2s
S25FL512SAGMFI011 512Mb 147.4s
*Please note the programming and verify time will depend on
different IC type; please refer to the IC specification before
programming.
Hardware
SF600Plus is designed with ISP header, through an appropriate
connector, users can connect the programmer and drive the SPI
signals, supply the memory and control the controller or
application status. Please refer to Table 1 for the SF600Plus
2x10 header pin out. DediProg also provides the SF600Plus ISP
Cable which is used to connect the programmer to the 2X6 2.54mm
ISP Pin Header on board, please refer to Table 2 for the
SF600PlusISP Cable 2x6