Quantity | 1 - 100 |
Price | 3460 |
MOQ | 1 PIECE |
Port | VADODARA |
Lead Time | 7 |
BLACK | 3500 |
MouldTech Impact Bars are designed to absorb impact at the
loading points of Conveyor Belts, where a combination of high
energy absorption and low friction is needed. Due to ease of
installation, these Impact Bars replace the conventional idler
sets. The top cover is made of Ultra High Molecular Weight
Polyethylene, which gives these Impact Bars a very low friction
top surface. The middle portion is high-quality energy-absorbing
rubber, which acts as a shock absorber at the loading zones of
conveyor installation. These Impact Bars are also available with
tapered ends on one side or on both sides to prevent any damage
to the conveyor belt.
MouldTech Impact Bars can be fitted with T Bolt. A ’T-Track’
fastening system also makes the element adaptable to any cradle
arrangement, which the conveyor installation might have. The
Impact Bars come in standard lengths of 1220mm, 1500mm and 1524mm
with the top cover of UHMWPE and are supplied with 8 bolts and
Nylock nuts as a standard accessory. Special sizes of Impact Bars
are also manufactured on special requests.