Clamp Rubber Hose

category

Execution standards

Performance and use

Universal rubber hose for water transportation

HG/T2184

Uses: conveying water and neutral liquids.

Operating temperature: -20°C~+45°C(-4°F~+113°F). EPDM tube: -20°C~+120°C(-4°F~+248°F). Structure: The inner rubber layer is black or light-colored synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected with black or red, yellow, blue and other light-colored rubber materials. The inner and outer glue can also be used EPDM synthetic glue.

Air rubber hose

GB/T1186

Application: conveying air and inert gas.

Operating temperature: -20°C~+45°C(-4°F~+113°F). EPDM tube: -20°C~+120°C(-4°F~+248°F). Structure: The inner rubber layer is black synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected with black or red, yellow, blue and other light-colored rubber materials. The inner and outer glue can also be used EPDM synthetic glue.

Oil transfer rubber J rubber hose

HG/T3I038

With N way: convey diesel, steam oil G, lubricating oil and other mineral oil B. Electrostatic conductive adhesive O-tubes can also be produced.

Structure: The inner rubber layer is black synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected black or red, yellow, blue, etc

Light-colored acid and alkali resistant compound.

Operating temperature: -20°C~+120°C(-4°F~+248°F).

Oil transfer rubber J rubber hose

HG/T3I038

With N way: convey diesel, steam oil G, lubricating oil and other mineral oil B. Electrostatic conductive adhesive O-tubes can also be produced.

Structure: The inner rubber layer is black synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected black or red, yellow, blue, etc

Light-colored acid and alkali resistant compound.

Operating temperature: -20°C~+120°C(-4°F~+248°F).

Acid and alkali acid infusion rubber hose

HG/T2183

Uses: Convey sulfuric acid, 30% hydrochloric acid, 15% sodium hydroxide solution and acid-base solution equivalent to the above concentration (except nitric acid) with a concentration of not higher than 40%.

Structure: The inner rubber layer is black synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can choose black or red, yellow, blue and other light-colored acid and alkali resistant compounds.

Operating temperature: acid and alkali rubber hose: -20°C~+45°C (-4°F~+113°F);

Acid infusion rubber hose: -20°C~+80°C (-4°F~+176°F).

Heat-resistant rubber hose

Q/LXS014

Uses: Conveying industrial water with a temperature not higher than 120 °C.

Structure: The inner rubber layer is black synthetic glue; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected with black or light-colored heat-resistant rubber such as red, yellow and blue.

Operating temperature: -20°C~+120°C(-4°F~+248°F).

Sandblasted rubber hose

HG/T2192

Uses: conveying abrasive materials such as quartz sand, iron sand, cement, and mud at room temperature.

Structure: The inner rubber layer is black synthetic glue, wear-resistant and impact-resistant; The skeleton layer is a synthetic fabric layer; The outer rubber layer can be selected with black or red, yellow, blue and other light-colored rubber materials.

Operating temperature: -20°C~+45°C(-4°F~+113°F).