MOQ | 5 tons |
Port | xingang,tianjin |
Lead Time | 7days |
Appearance | transparent | Density | 2.4-2.6g/cm3 |
Hardness | 6-7(Moh's) | SiO2 content | 72% |
1) Product
Introduction
Glass
beads for sandblasting has the features of chemical stability,
high mechanical intensity and hardness. They can be blasted onto
the object surface with compressed air and can be used on
compress glass, rubber, plastic, moulds with metal casting or
compressing. The jetting balls would help reduce elasticity of
the surface materials and increase wearing
capacity.
2)
Product Specification
Main
products specification for sandblasting according to following
table:
No. |
Diameter(um) |
Corresponding sieve size |
1 |
850-425 |
20-40 |
2 |
425-250 |
40-60 |
3 |
250-150 |
60-100 |
4 |
150-105 |
100-140 |
5 |
105-75 |
140-200 |
6 |
75-45 |
200-325 |
You
can choose different size glass bead between 45um-850um according
to different function.
High Strength Glass Beads (for
Blasting)
With
compressed air as implicit power, this product is made by
sprinkling beads under high speed and pressure on the surface of
workpiece for peening and polishing.
Other purposes of the products are
as follows:
1.
Clear diverse moulds of impact forging, forging, glass, rubber
and plastic, metal casting and
extrusion.
2.
Eliminate tensile stress, increase fatigue life and enhance
stress corrosion resistance. For example, aircraft engine turbo,
vane, shaft, undercarriage, diversified springs and gears,
etc.
3.
Clean and remove slitter edge and burr on the circuit plate and
plastic-sealed geminate transistors before stannum
soldering
4.
Remove stems in the piston and cylinder and provide bright and
half-lackluster surface for medical mechanical instruments and
automobile parts
5.
Clear electromotor and such parts as loop, electric brush and
rotor of during heavy repair
6.
Clean up and remove burr of metal tube and precisely-melten
non-ferrous metal tube. Be used for peening aggrandizement and
polishing of textile machinery parts.
High Strength Glass Beads for blasting
Type |
Mesh |
Grain Size μ m |
30# |
20-40 |
850-425 |
40# |
30-40 |
600-425 |
60# |
40-60 |
425-300 |
80# |
60-100 |
300-150 |
100# |
70-140 |
212-106 |
120# |
100-140 |
150-106 |
150# |
100-200 |
150-75 |
180# |
140-200 |
106-75 |
220# |
140-270 |
106-53 |
280# |
200-325 |
75-45 |
3) Technical
references
Appearance:
Clean and transparent, no visible bubbles and
impurity.
Density:2.4-2.6g/cm3
Hardness:6-7(Moh's)
Spherical
beads:≥75%
SiO2
content:>72%
4)
Package
1.Using
double-deck package, the inner is polythene film and its
thickness is not less than 0.5mm; the outer is plastic woven bag
to prevent leak or damp. The net weight of each bag is
25±0.2kg.
2.Using
double-deck package, the inner is polythene film and its
thickness is not less than 0.5mm, the outer is paper-plastic
compound bag to prevent leak or damp. The net weight of each is
25±0.2kg.
3.According
to clients' requirement.
ROOM602,6TH FLOOR,UNIT 3,XINGSHENG NEW AREA ,YONGXING ROAD ,LANGFANG CITY,HEBEI PROVINCE,CHINA,065000