Vertical Sump Pump Sand
Pumping
Product Presentation
-MSP heavy duty sump pumps are vertical, shaft driven
centrifugal slurry pumps designed for transferring abraisive
and high density slurries from sumps, pits and other
submersible sources.
-Models are available in sizes ranging from 40mm to 250mm
discharge and are capable of flow rates from 5 to 350 litres
per second (79-5540 USGPM) at heads of up to 40 metres (130ft).
The heavy duty design of the MSP pumps allows the passage of
large particles with a diameter of up to 50mm.
-Pumps will continue to operate even when the top inlet is not
submerged, allowing the liquid level to to be lowered to the
bottom of the sump or pit. Suction extension pipes of up to
2metres in length can be added to the bottom inlet of the pump
to extend the pumping depth.
-Designed as a fixed installation the MSP provides reliable
pumping performance with minimal maintenance requirements and
simple servicing.
Feature
CANTILEVERED SHAFT
The standard MSP pumps feature a cantilevered shaft which is up
to 2400mm long. The cantilevered shaft means that there is no
shaft sealing requirement and the drive end bearings do not
come into contact with any pumped product. This reduces the
risk of bearing failure and extends the wear life of the
pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27%
chrome white iron or rubber coated steel for exceptional wear
resistance and service life with minimal corrosion. The heavy
duty design can pump high density and abraisive slurries and
the large passages of the impeller allows the transfer of large
particles without blockages in a wide range of mining,
processing and heavy industrial applications. Wet end stub
shaft options are available to suit severe duty
applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of
materials to suit the requirements of operators. Standard
options include mild steel and rubber lined mild steel.
Composite options are available.
VERSATILE DRIVE OPTIONS
MSP pumps can be directly driven using electric motors or belt
driven with either set speed or variable speed operation.
REMOVABLE STRAINERS
MSP pumps feature rubber or cast iron upper strainers and cast
iron lower strainers to prevent blockages. The strainers are
easily removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft
seal which further extends the pumping depth and enables the
transfer of slurries from deeper sumps and pits.
Application
The MSP Heavy Duty Sump Pumps are capable of providing reliable
and efficient performance for the transfer of abraisive and
high density slurries from sumps, pits and tanks in a wide
range of mining, processing and heavy industrial
applications.
MSP/MSP(R) Sump Pump Clean Water Performance
Table
|
TYPE
|
Allowable
Mating
Max
Power
|
Material
|
Range of Performance
|
Impeller
|
|
Liner
|
Impeller
|
Capacity (Q)
|
Head(H)
|
Max.Eff
(%)
|
Speed
(r/min)
|
NO. of
Vanes
|
Impeller Diameter
(mm)
|
(m³/h)
|
(L/s)
|
(m)
|
40PV(L)-MSP
|
15
|
M
|
M
|
19.44-43.2
|
5.4-12
|
4.5-28.5
|
40
|
1000-2200
|
5
|
188
|
40PV(L)-MSPR
|
RU
|
RU
|
17.28-39.6
|
4.8-11
|
4-26
|
40
|
1000-2200
|
5
|
188
|
65QV(L)-MSP
|
30
|
M
|
M
|
23.4-111
|
6.5-30.8
|
5-29.5
|
50
|
700-1500
|
5
|
280
|
65QV(L)-MSPR
|
RU
|
RU
|
22.5-105
|
6.25-29.15
|
5.5-30.5
|
51
|
700-1500
|
5
|
280
|
100RV(L)-MSP
|
75
|
M
|
M
|
54-289
|
15-80.3
|
5-35
|
56
|
500-1200
|
5
|
370
|
100RV(L)-MSPR
|
RU
|
RU
|
64.8-285
|
18-79.2
|
7.5-36
|
62
|
600-1200
|
5
|
370
|
150SV(L)-MSP
|
110
|
M
|
M
|
108-479.16
|
30-133.1
|
8.5-40
|
52
|
500-1000
|
5
|
450
|
200SV(L)-MSP
|
110
|
M
|
M
|
189-891
|
152.5-247.5
|
6.5-37
|
64
|
400-850
|
5
|
520
|
250TV(L)-MSP
|
200
|
M
|
M
|
261-1089
|
72.5-302.5
|
7.5-33.5
|
60
|
400-750
|
5
|
575
|
300TV(L)-MSP
|
200
|
M
|
M
|
288-1267
|
80-352
|
6.5-33
|
50
|
350-700
|
5
|
610
|
Note: "M": Wear-resistant Alloy. "RU":
Rubber
Material
Description
|
Standard Material
|
Material Options
|
Shaft
|
4140 Mild Steel
|
Available on Request
|
Bearing Housing
|
Cast Iron
|
|
Column
|
Mild Steel
|
|
Upper Strainer
|
Rubber
|
Cast Iron
|
Lower Strainer
|
Cast Iron
|
|
Back Liner
|
27% Chrome White Iron
|
|
Pump Casing
|
27% Chrome White Iron
|
Rubber Lined White Iron
|
Impeller
|
27% Chrome White Iron
|
Rubber
|
Discharge Pipe
|
Mild Steel
|
Rubber Lined Mild Steel/ Composite
|
Adaptor Plate
|
Mild Steel
|
|
FAQ
A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer
in pumps. After accumulation and development of many years, we
have formed a complete system of pump design, selection,
application, manufacture, marketing and maintenance. We have
passed CE, SGS certificate. Our customers are at home and
abroad. Hope to coorperate with the worldwide friends.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump
working condition details.
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should I offer to get pump solution?
1, Head: m
2, Flow: m3/h
3, Max Solid size: mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor:
Welcome inquiry!
Serena Zhang
Contact:
Mob: +86 158 3083 2057
Tel: +86 312 8929296
Fax: +86 312 3085383