Port | chongqing, China |
Packaging | Wooden case or custom |
Lead Time | 7-15 days |
Product name | circuit breaker tester | Power Supply | AC220V±10%; 50Hz±10% |
Working Environment | Temperature: -10~50°C; Humidity:<80% | Internal DC Power Source | Voltage: 12~265V; current:0~20A |
Data Save | Built-in 8G storage memory and 2 USB interface | Vibration measurement | Range: 0~5000G; error:<3% |
Coil Current Measurement | Range: 0~20A; resolution: 0.001A; error:<0.01A | Pre-insertion Resistance Measurement | Range: 50~5000ohm; error :<1%RDG+2D |
Time Measurement | Range: 4000ms; Error :< 0.1ms; Resolution: 0.01ms | Warranty | 12 Months |
GDGK-307 Vacuum Switch Tester Dynamic contact resistance machine with RS232
1. Circuit
Breaker Analyzer is used for testing, analyzing and assessing
power system circuit breakers, mechanical characteristics of
load switches and isolated switches and other AC high voltage
switches, contact resistance, Arcing contacts and vibration
characteristics etc.
2. The functions of Circuit Breaker Analyzer cover all
testing items of high voltage circuit breaks.
unique advantages:
1. The
integrated vibration test function of Circuit Breaker
Analyzer provides a new means of detection circuit breaker
mechanical characteristics for users, compared to traditional
time measurement and speed measurement, the vibration
fingerprint detection is easier and more
efficient.
2. The
vibration fingerprint test results contain richer information
of circuit breaker operation, for potential risk of failure
or faulty breakers, it can locate the fault position
quickly.
3. The
vibration tests do not need to change the original line
connection, so the users can complete the charged detection
of mechanical characteristics of circuit breaker.
4. Arcing
contact analysis module allows users to automatically assess
the degree of loss of inside Arc suppression contact of
circuit breaker without disassembly.
5. Users
can use Circuit Breaker Analyzer to complete the contact
resistance tests, do not need to buy contact resistance
tester separately.
Features:
1. Measurement of closing time, opening time, time spread
between poles, time spread between units of one pole, bounces
etc.
2. Measurement of closing speed, opening speed and average
speed.
3. Measurement of clearance between open contacts, over
travel, overshoot travel and total travel.
4. Measurement of closing coil current time curve, opening
coil current time curve and the maximum coil current
5. Test travel time curve, speed time curve and acceleration
time curve
6. Measurement of pre-insertion resistance value and
pre-insertion ion time.
7. Test contact resistance
8. Measurement of dynamic resistance time curve and length
for arcing contacts
9. Vibration test, including vibration fingerprint curve
acquisition, management, and vibration fingerprint curve
automatic matching.
10. CO-t1-CO,O-t-CO-t1-CO,CO rated operating sequence
verification test.
11. Drawing Envelopes for reference travel curve and compare
travel curve with envelopes
12. Mechanical travel curve automatic compare with saved
travel curve
13. Measurement of CO time (close-open time) and OC time
(Opening-Closing time)
14. Graphite contact closing time, opening time, dynamic
resistance curve measurement, zoom, editors, statistics and
analysis for measurement curves.
15. 12.1-inch touch screen for control and data input.
16. Built-in micro printer for test result printout.
17. Generate WORD format test report automatically (all
reports and data can be exported through Flash
disk).
Specification
12 channels for time measurement | 3-channel supports both the time contact and resistance contact time |
6-channel isolated contacts for cascaded unit measurement of pole | |
Time measurement | Range: 4000ms |
Error :< 0.1ms | |
Resolution: 0.01ms | |
Travel measurement according to sensor |
Linear resistance sensor: Measurement range: 0~250mm; resolution: 0.01mm; error:<0.5mm Measurement range: 0~25mm; resolution: 0.01mm; error:<0.05mm |
Angle resistance sensor: Measurement range: 0~360°; resolution: 0.01°; error:<0.5° |
|
Pre-insertion Resistance Measurement | Range: 50~5000ohm; error :<1%RDG+2D |
Dynamic resistance measurement | Test current: 25~100A |
Measurement error :< 1%RDG+2D | |
Contact resistance measurement | Range:0--10mohm ; Error<0.5%RDG+0.05%FS |
Range: 0-2mohm; Error:<0.5%RDG+2D | |
Speed measurement | 250mm linear resistance scale: 0~20m/s; error:<0.5%RDG+2D |
25mm linear resistance scale: 0~20m/s; error:<0.5%RDG+2D | |
Angle sensor: 0~20m/s; error:<0.5%RDG+2D | |
Acceleration sensor: 0~20m/s; error:<5%RDG+2D | |
Coil current measurement | Range: 0~20A; resolution: 0.001A; error:<0.01A |
Vibration measurement | Range: 0~5000G; error:<3% |
Internal DC power source | Voltage: 12~265V; current:0~20A |
Data Save | Built-in 8G storage memory and 2 USB interface for data export and external keyboard or mouse connection |
Power supply | AC220V±10%; 50Hz±10% |
Working environment | Temperature: -10~50°C; Humidity:<80% |
CHONGQING GOLD MECHANICAL & ELECTRICAL EQUIPMENT CO.,
LTD
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd. mainly design and manufacture the oil purifier and electrical testing equipment for more than 10 years.
After several years’ development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of oil purifier and electrical testing equipment in China;
We have developed sales channels in many countries such as UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan, India, Germany, Belgium, USA, Mexico, Kenya, Nigeria, South Africa and other countries worldwide.
And we have gained strong advantage and high reputation in international market.
We have persisted on the business idea of "Integrity Basis and Quality First" for the stable and constant development. We are making effort to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, quality and service are our supreme target!
Exhibition Abroad
Feedback and Communication
1. Q: What's the delivery lead time?
A: Y"For most of the products, delivery lead time is 10 days after the order is confirmed; For some customized products, please check with the sales person."
2.Q: What's the payment term?
A: "For total amount below USD3,000.0, payment term is 100% T/T as deposit; For total amount above USD3,000.0, payment term is 30% T/T as deposit, the balance before delivery; The payment term is also negotiable."
3.Q: What's the warranty period?
A: "Warranty period is 1 year"
9F, Jin Tai Building,No.23 Nanping Xi Road,Nan An District,Chongqing, China