Specifications
1.Material:carbon
steel
2.Output power : 100kW~1200kW
3.Pipe type:round/square/rectangular pipe
4.M.S.pipe or G.I.Pipe
Features of solid state HF welder
The
high frequency induction
welders are
different from the vacuum tube type high-frequency welding
machine.
The vacuum tube type high-frequency welding machine has an output
welding transformer, and the induction ring is installed on
the
secondary side of the welding, which is relatively easy to match,
and the requirements for the induction coil are not very strict.
However,
the welding resistance is more than one level, and the efficiency
is obviously low
In addition to the low working voltage of the whole machine,
the
solid state welders directly
resonates with the induction coil worn on the welded
steel pipe. Because there is no welding, there is less level of
twisting, and the efficiency is obviously higher, then the
induction welding is more popular.
The inductor is strict and standardized, so that it can be
matched. At the same time, due to the voltage, the gap between
the inner diameter of the inductor
and the outer diameter of the welded steel pipe (V-shaped
opening) can be appropriately reduced, which is also a factor for
improving the welding efficiency
of the Solid State High Frequency Welder.
One
thing is for sure, the benefits of the strict and standardized
inductor are far higher than the production cost
of the induction coil.
Fuchang Road,Jingxiu District, Baoding City,Hebei,China