Capacitive Bushing

Port	Shanghai
Packaging	as customer's request
Lead Time	20

Contact Now

Product Details

Some information about the OIP capacitive bushing of NJREC
OIP condenser transformer/reactor bushing is mainly used for power transformer/reactor as current carrier for leading in and out current of high voltage side, middle voltage side and low voltage side of transformer as well as insulate the oil tanks of power transform//reactor.

40.5kV - 2000kV OlP condenser transformer/reactor bushing

40.5kV - 800kV OlP condenser transformer/reactor bushingwith composite envelope

40.5kV - 252kV oil-oil OlP condenser transformer bushing

126kV - 550kV oil-SF6 OlP condenser transformer bushing

24kV - 40.5kV heavy current OlP transformer bushing

72.5kV - 800kv OlP condenser wall bushing

Types of capacitive bushing

OIP Condenser bushing is the current carrying and insulating equipment component, of which high-tension line through the wall, facility shell, connection between facility in the power system. According the application which is classified as below:

Oil to Air Bushing

lt's for oil insulated type power transformer.

Oil to Oil Bushing

lt's for the connection between the power transformer and cable-junction boxesand other oil-filled devices .

Oil to SF6 (Gas) Bushing

lt's for the direct connection of power transformer to gas-insulatedswitchgear(GIS) and can be mounted at any angle.

High-Current Bushing
From 5000A to 35,000A. Normally for connecting the oi-filled power transformerto a generator bus.

Wall Bushing

lt's for through the wall and other types through such as the roof.

GIS Bushing

it's for gas-insulated and air-insulated switchgear.