Port | Guangzhou |
Lead Time | 2 |
Power Consumption | < 120W at work, < 4W at stand by state | Dimensions | 170× 98× 291mm(L× W× H) |
Use | Household Pre-Filtration | Certification | CE, EMC, ISO, RoHS |
Alkaline
Water Ionizer (CE Certified)
(BW-A) Quick King
Introduction
This water ionizer is credited by health authority SFDA as
medical equipments. It integrate purifying, mineralizing and
electrolyzing technologies, produces the best available drinking
water in conformity with WHOs 6 drinking water standards, most
importantly, it produce negative potential, ionized alkalized
water, which can neutralize the excess free radicals and alkalize
our acidic body which are widely accepted as the underlying
causes for a lot of modern diseases, from obesity, diabetes to
cancers.
Certification:
ISO9001: 2000 Quality Management System Certificate, European CE
certification; Certified as Medical Device by Governments of
China, top 10 best credited water ionizers in
China.
Advantages:
1. Concise, easy for hanging on wall or positioning on the
counter;
2. Space efficient and strong electrolysis
effect;
3. Imported electrolysis mechanism prolongs operation
life;
4. Sealed circuit module design makes operation
easier;
5. A reverse self-cleaning with each startup and
shut-off.
Specification
1. Elegant Appearance: Patented international streamline
frame.
2. Volume Delicate: Only 4.8 cm3.
3. Lightest Weight: Weighing just 3 kilograms.
4. Hanging Or Sitting At Will: Wall Hanging or Installed on
desktop at will.
5. Lifespan: Lifespan of the whole machine is up to 10
years.
6. Reliable Fittings: Key components are imported, secure and
endurable.
7. High Flow Volume: Maximum flow up to 2.5
L/minute.
8. Unique Configuration: Out built canister for adding
minerals.
9. Intelligence Control: Microcomputer controls automatic
reverse-rinse, protection etc.
10. Wide Scope of Applications: Applies to ultra high voltage,
ultra low voltage, and turned on by water pressure.
Technical parameters: | ||
Power and voltage | AC220V/50Hz, or AC110V/60Hz | |
Power Consumption | < 120W at work, < 4W at stand by state | |
Body | Dimensions | 170× 98× 291mm(L× W× H) |
Weight | Approx: 3.0kg(full water: 3.5kg) | |
Maximum operating temperature | Not more than 60° C | |
Applicable Water Pressure | 70~350KPa(0.7~3.5Kgf/cm² ) | |
Applicable Pressure of Water inlet pipe | 70~350KPa(0.7~3.5Kgf/cm² ) The water inlet pipe must be connected to the control valve. | |
Electrolysis | Way of electrolysis | Continuous electrolysis |
Water Flux(Generated flux) |
2.5L/min[when water pressure is 100KPa{1Kgf/cm²
}] 3.0L/min[when water pressure is 200KPa{2Kgf/cm² }] |
|
Electrolysis strength | Alkaline: 3 Levels, Acidic: 1 Levels | |
Continuous water generating time | 15 minutes in the constant temperature state | |
Warming for refined filter element cleaning |
Please clean or replace the refined filter elements after "
refined filter element replacement indicator" is it and the buzzer sounds are heard. |
|
Materials for filtration | PP filter, FZ-molecular sieve, FX- molecular sieve, activated carton filter | |
Over-temperature protection device(built-in insulation transformer) | Temperature fuse (working temperature: 105° C) | |
Length of power cord | Approx: 2 meters |
9th Floor, Block C, Poly World Trade Center, No. 1000 Xingang Dong Road, Haizhu District, Guangzhou City, Guangdong Province, China