MOQ | 1000 Meter/Meters |
Type | Other Watering & Irrigation | Place of Origin | Hebei, China |
Brand Name | Fosite | Model Number | ST2036 |
Material | Plastic, PE | Color | black or as per your request |
Usage | for irrigation system | Diameter | 12mm,16mm,etc |
Thickness | 0.6-1.2mm | type | pipe and fittings |
samples | free | Flow rate | 3l/hr |
Pressure | 0.6-3bar | perine147258369 |
Features of drip irrigation
pipe :
1. The round dripper is produced first by high-precision mould,then stuck to PE hose.
2. The dripper which is directly welded inside the pipe has slight pressure loss and
accurate distribution.
3. Good anti-block property, smooth flow channel and even water distribution.
4. There are two kind of drippers: pressure-compensation and nonpressure-
compensation, suitable for different terrain.
5. Different diameter, wall thickness and dripper spacing can be produced.
6. The most significate feature is that it can be used over 5-8 years.
It’s durable and widely used in open field irrigation.
Advantages:
The most versatile product in our catalog and one of
our best sellers. In-Line Emitter tubing is
standard 5/8" polyethylene tubing with either
2L/H,3L/H,4L/Hemitters extruded into the tubing at
the factory. Since the emitters are already
installed, all you do is roll out the tubing and
connect it to your main water source. The cost is
just slightly higher than if you inserted the
emitters yourself, but the installation time is
greatly reduced. In-Line Emitter Tubing can be used
on long or short rows, flat or hilly terrain, raised
beds, in loops around trees, or in straight lines for
hedges and windrows. We offer this in a variety of
emitter spacings.
Specification of drip irrigation
pipe/tube: