MOQ | 200 KGS |
Port | Taichung |
Packaging | 1 kg ; 5 kg ; 10 kg ; 25 kg ; 200 kg |
Lead Time | 7-14 days |
Shrinkage Rate % | <0.1 |
Room temperature liquid silicon rubber for molds is a
kind of two parts silicone rubber in addition cure or
platinum cure type with mixing ratio of 1:1 or 10:1. It
can be cures at room temperature as well as under heat.
It's a kind of food grade silicone rubber mainly used
for mold making.
Operation Instructions
1: Prepare the desired molds
Prepare a desired mold and clean it before
operation.
Notes: Make sure the desired molds and operation tools
were cleaned up to avoid uncured problem.
( Suggest to use stainless steel, wooden or plastic
material mixer. )
2: Take amount Part A :100 g / Part B :100 g ( or Part
A : 100 g and Part B :10 g ) and mix evenly.
Notes:
* Weigh the two part exactly by electronic weight. If
any part not in exactly weight, it may cause changing
of hardness, or even cause uncured problem.
* Mix part A and part B evenly.
3: Vacuum the mixed material
Without exception, this step takes less than 10
minutes. Otherwise, it will cause cross linking
reaction, and no more further steps will be
available.
4: Pouring casting
Notes:
* For simple mold, just to pour the vacuumed material
into mold, cured will be 8-12 hours.
* For fine designed mold, to brush the liquid silicone
on mold surface then pour the silicone into mold. This
will make the casing properly.
Normally, different size of silicone mold should be
select according to different product's
features.
For example :
* For
skin like / Human body / Sex Doll :
Suggest our AS3NO05 / AS3NT05.
* For
products size ( within 20 cm ) :
With fine designs, soft silicone is suitable, suggest
10-20 shore A.
* For
products size ( 20cm-80cm ) :
With fine designs, suggest 20-25 shore A.
With simple designs, suggest 25-30 shore A.
* For
products size ( 80cm-150cm ) :
With fine designs, suggest 25 shore A.
With simple designs, suggest 30-35 shore A.
* For
products size ( more than 150cm ) :
With fine designs, suggest 25-28 shore A.
With simple designs, suggest 35-40 shore A.