Series A75 Flanged triple offset butterfly valve provides zero leakage through no-rubbing 90-degree rotation across a wide range of pressure and temperature conditions.
A75 Flanged Triple Offset Butterfly Valves GENERAL INFORMATION
Series A75 Flanged triple offset butterfly valve provides zero leakage through no-rubbing 90-degree rotation across a wide range of pressure and temperature conditions.
Widely used in many industries such as Oil & Gas, Chemical & coal, petrochemical, desalination plants, waterworks, fossils, district heating, nuclear, Iron & Steel, Mining, automotive, shipyards, aerospace.
A75 Flanged Triple Offset Butterfly Valves FEATURES
• ISO 5211 bracket for easy mounting of actuators
• Triple offset and ellipsoidal sealing geometry
• Bubble tight shut-off
• Inherently firesafe by design
• A metal seal ring in Duplex and a highly wear-resistant Stellite grade 21 seat ensure prolonged superior tightness
• Single piece cast body with face to face dimensions to ISO5752, ASME B16.10 and API 609 double flanged short pattern, guarantees interchangeability with other valve types
• Extensively hardened bearings, incorporating a standard reinforce, braided, flexible graphite bearing protector, ensure increased reliability
• Blowout proof devices on shaft keep sure safety of shaft operating
• Pin-less shaft to disc connection makes the valve convenient for parts replacement and reliable even under corrosion
A75 Flanged Triple Offset Butterfly Valves Technical Data
Connection |
Double flange |
Size |
3"-80" for PN10,PN16,Class150; 3"-48" for PN25,PN40,Class300; 3"-24" for Class600 |
Pressure |
PN10,PN16,PN25,PN40,Class150,Class300,Class600 |
Flange standard |
ASME B16.5 Class150,Class300,Class600; EN1092 PN16,PN25,PN40 |
Face to face |
ISO 5752, ASME B16.10, API609 Double flanged short pattern |
Pressure test |
API 598, ISO 5208 Rate A, ANSI B16.104(ANSI/FCI 70-2)Class Ⅵ |
Temperature |
-29°C to +538°C |
Operator |
Lever,Gear box,Pneumatic actuator,Electric actuator |
A75 Flanged Triple Offset Butterfly Valves PARTS LIST AND MATERAIL SPECIFICATION
No. |
Part name |
Material |
|
1 |
Body |
WCB |
CF8M |
2a |
Disc |
WCB,CF8 |
CF8M |
2b |
Disc sealing |
UNS31803(duplex)+graphite |
|
2c |
Disc sealing retainer |
SS304 |
SS316 |
2d |
Disc sealing retainer screw |
SS304 |
SS316 |
3 |
Seat welded surface |
Stellite Gr.21 |
|
4 |
Shaft |
17-4 PHSS,1.4462 |
|
5 |
Packing gland |
CF8 |
|
6 |
Bottom cover |
Same as body |
|
7 |
Cover seal |
Graphite |
|
8 |
Thrust washer |
SS316 |
|
9 |
Bracket |
WCB |
CF8M |
10 |
Retaining ring |
SS304 |
|
11 |
Packing |
RPTFE, Graphite |
|
12 |
Packing ring |
SS316 |
|
13 |
Bearing |
SS316+PTFE |
|
14 |
Thrust bearing |
SS316 |
|
15 |
Key |
SS316 |
|
16 |
Bolt |
SS304 |
|
17 |
Bolt |
SS304 |
|
18 |
Bolt |
SS304 |
|
19 |
Nut |
SS304 |