| Port | Ningbo |
| Packaging | Wooden box |
| Lead Time | 3-7 |
| Model | A44C-150LB (A44Y-150Lb) | Type | Spring loaded, enclosed (closed bonnet), with lever, full lift |
| Service | Steam, air, nitrogen, petroleum gas, LPG and other non-corrosive compressible media | Orifice | E — Diameter 1.265cm²/12.7mm |
| Class | Class 150 | Connection | Flanged, ASME B16.5 Class 150 RF; |
| Temperature | [−29 °C to +300 °C] (typical for WCB) | Certification | ISO 9001; |
Spring-loaded, enclosed (closed-bonnet), full-lift safety valve with a lift lever, for steam, air and other compressible media. 1" inlet × 2" outlet flanged ends, carbon steel (WCB) body, Class 150. The enclosed bonnet routes all discharge through the outlet piping with no atmospheric release; the external lever allows on-line manual lift testing. Opens rapidly at set pressure, discharges the required relief flow, then reseats and re-seals automatically. Factory set, sealed and 100% tested.
The A44C-150LB is a spring-loaded, enclosed, full-lift safety valve with a manual lift lever — combining a leak-tight (closed-bonnet) design with the ability to perform on-line manual checks. It is widely used on air, nitrogen, petroleum gas, LPG and other flammable/toxic process gases, and also on clean media such as steam.
Enclosed bonnet with lever. Unlike an open-bonnet (A48) valve, the enclosed construction routes all discharge through the outlet piping with no release from the bonnet, making it ideal for toxic, flammable or valuable gases. The external lift lever still permits manual pulling during operation to verify the disc is not stuck and that the valve actuates correctly (the lever is for lift testing only and does not adjust the set pressure).
Blow-down / counter-impulse nozzle. The full-lift design with a blow-down ring/nozzle delivers fast, high-capacity relief, well suited to large gas and steam discharges.
Standardised envelope. The 1" inlet × 2" outlet flanged combination places this valve in the API 526 "D" orifice dimensional family (1D2), making it interchangeable with other standard D-orifice valves for easy replacement and spare-parts standardisation. Each valve is factory set to the ordered set pressure, lead-sealed and delivered with hydrostatic shell and seat-tightness test records.
| ● 流道面积/喉径 Orifice Area/Diameter 1.265cm²/12.7mm | |||||||||||
|
型号 Type |
通径(英寸) Size (inch) |
ANSI 法兰磅级 Flange Class |
最高整定压力 (MPa) Maximum Set Pressure |
38℃ 最高背压 Back pressure limit 38℃ (MPa) |
材质 Material | ||||||
|
进口温度 (℃) Inlet Temperature |
|||||||||||
| Inlet × Orifice × Outlet |
进口 Inlet |
出口 Outlet |
-29℃~38℃ | 38℃~232℃ | 232℃~427℃ |
VTO (VTA42C) |
VTB (VTWA42C) |
阀体 Body |
弹簧 Spring |
||
|
VTO VTA42C VTA44C VTA48C |
01 ( 150) | 1E2 | 150 | 150 | 1.96 | 1.27 | 0.55 | 1.96 | 1.58 |
碳钢 C.St |
合金钢 Alloy St. |
| 03 ( 300) | 1E2 | 300 | 150 | 1.96 | 1.96 | 1.96 | 1.96 | 1.58 | |||
| 03a(300a) | 1E2 | 300 | 150 | 5.1 | 4.24 | 2.82 | 1.96 | 1.58 | |||
| 06 ( 600) | 1E2 | 600 | 150 | 10.2 | 8.51 | 5.68 | 1.96 | 1.58 | |||
|
VTB VTWA42C VTWA44C |
09 ( 900) | 11/2E2 | 900 | 300 | 15.3 | 12.72 | 8.51 | 4.13 | 3.45 |
不锈钢 St.St |
合金钢 涂四氟 Alloy St. Spread Teflon |
| 15(1500) | 11/2E2 | 1500 | 300 | 25.54 | 21.23 | 14.2 | 4.13 | 3.45 | |||
| 25(2500) | 11/2E3 | 2500 | 300 | 41.37 | 35.4 | 23.65 | 5.1 | 3.45 | |||
| ● 尺寸 Dimensions | |||||||||||
|
型号 Type |
面心距 Center to Face |
法兰阀座总厚Total Thickness of Flange and Nozzle |
近似高度 Approximate Height H |
近似重量 Approximate Weight Cap type B (kg) |
|
||||||
|
进口 Inlet |
出口 Outlet |
阀帽形式 Cap Type |
|||||||||
| L | L1 | b | A | C | D | ||||||
|
VTO VTA42C VTA44C VTA48C |
01 ( 150) | 115 | 105 | 40 | 350 | 380 | 380 | 15 | |||
| 03 ( 300) | 115 | 105 | 40 | 350 | 380 | 380 | 15 | ||||
| 03a(300a) | 115 | 105 | 40 | 350 | 380 | 380 | 16 | ||||
| 06 ( 600) | 115 | 105 | 40 | 350 | 380 | 380 | 16 | ||||
|
VTB VTWA42C VTWA44C |
09 ( 900) | 140 | 105 | 51 | 460 | 480 | 500 | 28 | |||
| 15(1500) | 140 | 105 | 51 | 460 | 480 | 500 | 30 | ||||
| 25(2500) | 178 | 140 | 64 | 490 | 520 | 540 | 32 | ||||
| FAQ | |||||||||||
| Topic | No. | Question | Answer | ||||||||
| 1. Products & selection | 1 | What types of safety valves do you manufacture? | We mainly manufacture spring-loaded safety valves with flanged or threaded ends for steam, air, gas, water and oil service, in sizes from DN15 to DN500. Tell us your working conditions and we will send a catalogue and model list for you to choose. | ||||||||
| 2 | I am not sure which model or size I need, can you help me select? | Yes. Just offer us follow details: media, working pressure and temperature, required set pressure, and connection size and standard. Our engineers will select the model and send back a datasheet and drawing for your confirmation before you order. | |||||||||
| 3 | Is the set pressure adjusted before delivery? Can we adjust it ourselves? | Every valve is set and sealed at the set pressure as you need in order, and the value is marked on the nameplate. It can be re-verified on site within the spring range, but breaking the seal and changing the setting without authorization will void the warranty. | |||||||||
| 4 | What body materials are available? | Standard options are carbon steel and 304ss/316ss, with seat materials selected according to temperature and media. Just tell us the media and temperature and we will match the material; material certificates are available if need. | |||||||||
| 2. Certificates & Quality | 5 | What certificates do you have? Can you meet our market requirements? | Our factory is ISO 9001 certified and we can provide CE (PED) certification, EN 10204 3.1 material certificates and test reports . Please tell us the certificate list required by your market and we will confirm availability one by one before quoting. | ||||||||
| 6 | Can you provide test reports before shipment? Do you accept third-party inspection? | Yes. Each valve can be delivered with hydrostatic, seat-tightness and set-pressure test report, and third-party inspection or customer witness testing can be arranged at extra cost. | |||||||||
| 7 | How do you control quality? | We carry out incoming material inspection, in-process checks at each stage, and 100% set-pressure and seat-tightness testing before painting and packing, with all records traceable by serial number. | |||||||||
| 8 | Can we visit or audit your factory? | You are welcome to visit us, if travelling is inconvenient, we can also give a live video tour and share production and testing videos. | |||||||||
| 3. Quotation & MOQ | 9 | How do I get a quotation, and how long is it valid? | Send us the model (or working conditions), quantity and destination port, and we usually quote within 1–2 working days. Prices are normally valid for 30 days because raw material costs fluctuate. | ||||||||
| 10 | What is your MOQ? Can we mix different models in one order? | There is no strict MOQ for standard models, even one piece is acceptable. Special materials or special set pressures may carry a small setup fee. Mixing several models in one order is fine. | |||||||||
| 11 | Can I get a sample first? | Yes, sample should be paid first, and the cost can be reduced on the next bulk order. The sample can be delivered about 1-2 weeks after order. | |||||||||
| 12 | Do you offer discounts for larger quantities? | Yes, prices are graduated by quantity, so the larger the order the better the unit price. Please tell us your estimated annual volume and we will provide a tiered price list. | |||||||||
| 4. Lead Time & Shipping | 13 | What is your lead time? | Standard models in stock can delivery about 3–7 days after order. Special materials, large sizes or bulk orders usually take 25–45 days after order. | ||||||||
| 14 | Which Incoterms and ports do you use? | We normally work on EXW, FOB Ningbo or CIF/CFR to your destination port, samples and urgent orders can go by air or international courier. | |||||||||
| 15 | How are the valves packed for export? | Each valve is individually protected and packed in export plywood cases (fumigation-free) with desiccant, suitable for long sea freight; palletised or custom packing is also available. | |||||||||
| 5. Payment Terms | 16 | What payment terms do you accept? | Standard term is 30% T/T in advance, and 70% balance before shipment, PayPal or Western Union for samples and small amounts . | ||||||||
| 6. OEM & Customization | 17 | Can you put our own brand and logo on the valves? | Yes, we offer OEM service, your brand can be applied to the nameplate, body and packaging, subject to a minimum quantity and your brand authorization letter. | ||||||||
| 18 | Can you produce to our drawings or standards? | Yes, we can process according to your drawings, samples or specified standards (ASME / API / DIN / JIS / GB, etc.), and we will confirm all technical details cost before production. | |||||||||
| 7. Warranty & After-sales | 19 | What is your warranty period? | 12 months after products arrived your place, we repair or replace for free if the defects are caused by material or manufacturing. | ||||||||
| 20 | What should I do if there is a problem after we get the products? What is not covered? | Please send us photos, videos and the serial number, we will come back with a solution within 24 hours. If we confirm its quality issues we can handle by replacement, sending spare parts or credit on your next order. Damage from improper installation, media outside the agreed range or unauthorized modification is not covered. | |||||||||
| 21 | Do you supply spare parts? | Yes, springs, discs, seats and seal kits are available separately. Offer us the model and serial number and we will quote the parts. | |||||||||
| 8. Contact & Response | 22 | How can I contact you, and how quickly do you reply? | You can reach us by email, WhatsApp or WeChat ; we reply within 24 hours on working days (GMT+8), and for urgent matters please contact us directly by WeChat or WhatsApp. | ||||||||
Anfeng Industrial Zone, Oubei Town, Oubei Subdistrict, Yongjia County, Wenzhou City, Zhejiang Province