64oz 2L Double Wall VaccumProfessional Matte black Nitro Cold Brew Coffee Dispenser

Make nitro cold brew, first to make cold brew that you have added water to your coffee, you need to leave it in the fridge for about 24 to 36 hours. After 24 to 36 hours, you can now remove coffee grounds from cold extracted espresso. If your cold extract coffee machine doesn't have a filter, just filter the concentrate through a cheesecloth to remove coffee grounds and excess sediment. After leaving the concentrate, you can now add more filtered water to it until you reach the desired brewing strength.

New design- nitro cold brew coffee maker is a popular home brew coffee maker, classic mini keg nitro cold brew coffee maker with several parts: mini keg, coffee spear, tap and cartridge holder/nitrogen regulator, you need install and complete whole system before use. that is fun if you enjoy the way. We make Antler more easy to use with paramout look.

Pressurization cap- allowed refill gas, interior cartridge shell not convient when you need infuse another N2/N2O, so Antler with a sceond lid that allowed people to take out N2/N2O and infuse second or third cartridge. meanwhile could keep system in a sealed condition.

Antler handle-well durable chromed finished antlers handle, more like a crafts.

Built-in easy pour handle- makes it more convenient to carry and transport your nitro coffee on the go, and with a ABS plastic handle,allow people to brand with LOGO.

Insulated 64oz growler- means you can leave your nitro coffee maker outside of the fridge for longer periods of time and still experience thick, foamy pours.

Stainless steel dispensing straw-most durable and safest material possible for dispensing liquids.

Specification:

How to use?

1. Install tap and tighten with wench
2. Fill cold brew coffee, not much then 75%(40onces)

3. Install first cap, make sure system sealed
4. Place one 8g N2O or 2pcs N2,screw on second cap, infuse gas.
5. Shake system for 10-15 seconds,put in frige for more than 1 hour, allow gas full mixed with cold brew coffee.

6. Enjoy your nitro cold brew coffee.

FAQ:

Q1: Can I print my company logo on growlers?

A1: Absolutely yes. Pls. send us your VECTOR logo artwork by PDF, AI or EPS format, then we can choose suitable logo printing method for you. Currently we can do silk screen/etching/laser engrave/powder coating/3D printing etc.

Q2: Can you please include 2 colors logo for the growler/kegs. White and yellow

A1: Yes, If printing two color logo, there are 2 choices:

A: Silk screen printing: we can print two color, but not as perfect as 3D printing.

B: 3D printing: it is perfect, no obvious color difference, can do 2 or more colors.

Q5: Do your products meet the EU/FDA regulations?

A5: Yes, our kegs/growlers has passed EU/FDA testing, it can enter into your market successfully. Please see attached EU/FDA testing report.

Q6: How does your factory do regarding quality control?

A6: All the products will be 100% checked before the shipment.