5.6A stepper driver Lichuan MC556 for nema23 and nema24 stepper motor driver replace DM556

Quick Details (View All)

Place of Origin	Guangdong, China	Brand Name	Lichuan
Model Number	MC556	color	black
Product size	1177834mm	pitch of holes	111mm
Installation	Horizontal and vertical available	working voltage	24-50VDC
Power	>200W	32 DSP control	support
Driver type	digital driver

Product Details

5.6A stepper driver Lichuan MC556 for nema23 and nema24 stepper motor driver replace DM556

Packing list

MC556------1PC

Product Description

MC556 is a new digital two-phase hybrid stepper motor driver, which uses the latest 32-bit DSP control technology, according to user needs within 256 arbitrary subdivision and rated current within any current value, And the internal increase of the motor parameter automatic identification function, can be used for different motors with the corresponding operating parameters, the motor running very smooth, very small noise, suitable for driving 57,86 series motor.

competitive price Lichuan MC556 NEMA23 2 phase stepper motor driver

Driver Function	operation Insulation
Microsteps Sudivision setting	SW5-SW8 four DIP switches to set the drive micro-step subdivision, a total of 15 steps of mic ro-step breakdown. When the user sets the subdivision, the drive should be stopped first. For details on the numberof microsteps,Please according to the drive panel.
Working current setting	SW1-SW3 three DIP switches to set the drive output current, the output current of a total of 8 floor.Details on setting the output current,refer to the description of the driver panel.
Automatic half current Function	SW4 can be used to set the automatic semi-flow function of the drive. OFF mean the quiescent current is set to half of the dynamic current, and ON means the quiescent current is the same as the dynamic current SW4 should be set to OFF for general use, resulting in reduced heat generation in the motor an the drive, resulting in improved reliability. Approximately 0.4 seconds after the pulse train is stopped, the current automatically reduced by 50% (60% of the actual value) and the calorific value is oretically reduced by 36%.
Signal interface	PUL + and PUL- are the positive and negative terminals of the control pulsesignal;DIR + and DIR- are the positive and negative terminalsof the directional signal;ENA + and ENA- are the positive & negative terminals of the enable signal.
Motor interface	A + and A- are connected to the positive and negative terminals of the A-phase winding of the stepping motor; B + and B- are connected to the positive and negative terminals of the B-phase winding of the stepping motor.When A, B two-phase winding exchange,direction of the motor can be reversed
Indicator light	The driver has two red and green lights. The green light is the power indicator, the green light is on when the driver is powered on. The red light is the fault indicator. When the overvoltage or overcurrent fault occurs, the fault light is on.Fault clear, the red light off. When the drive fails, the fault can only be cleared by re-powering up and re-enabling it.
Power supply Port	DC power supply, the input voltage range: 24V-50VDC,Power more than 200W,Suggest working voltage 36VDC
Installation Notes	Driver dimension :117x78x34mm ,installation the hole spacing of 111mm can be horizontal can be horizontal or vertical mounting (suggest the vertical installation) when installed ,mke it close to the metal cabinet to facllitate heat .

MC556 driver with eight DIP switch set subdivision accuracy, dynamic current and half-flow / full-flow, described in detail as follows:

FAQ

1. Are you factory?

Yes, we are facotry, and we produce stepper motor/driver, Servo motor/driver and planetary reducer for more then 10 years in China. Lichuan is our registered brand.

2. How to select models?

Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

3. How do you ship the goods?

We normally ship goods by express(DHL/UPS/FEDEX/EMS), by sea and by air, also accept customer appointed.

4. Can I test sample?

Yes, sample charged can be offered for testing.

5. Can we be agent or distributor?

Yes, welcome and we will support you.

6. Can you do OEM or ODM service?

Yes, we have R&D department and accept OEM and ODM service.

7. How about warranty?

One year warranty, technical support available, we always try our best to help customers to solve problems in time.