Packaging | 1 |
ATR3CMOS Series M42+2” USB3.0 TE-Cooling CMOS Camera
Basic characteristic of ATR3CMOS
ATR3CMOS camera adopts SONY Exmor,Exmor R or Exmor RSCMOSsensor
as the image-picking device with two-stage peltier cooling
system. This will greatly increase the signal to noise ratio and
decrease the image noise. Besides, smart internal heat transfer
structure is used to transfer the heat radiation. Electric fan is
used to increase the heat radiation power. USB3.0 is used as the
data
transfer interface.
ATR3CMOS comes with advanced video & image processing application ToupSky; providing Windows/Linux/ macOS/Android multiple platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc);
The ATR3CMOS can be widely used in low light environment capture and analysis, as well as the astronomy application.
The ATR3CMOS26000KPA camera is designed specifically for astrophotography. It is mainly used for deep sky photo shooting, since the camera has cooled CMOS sensor, ultra-low readout noise and zero amp-glow. It can be also used for planetary photo shooting. Its extraordinary performance and extensive usage will give you great astrophotography experience.
The features of ATR3CMOS26000KPA are listed below:
IMX571 Color CMOS Sensor
Resolution: 6224 x 4168
3.76 um Square Pixels
APS-C Optical Format
16-bit ADC
512 Mbyte Memory
Precise Temperature Regulation
G Sensitivity: 484.6mv with 1/30s
Zero Amp-Glow
Ultra-Low Noise: 1.16 to 2.35e- (Low Noise Mode)
Support Low Noise Mode/ High Frame Rate Mode (6.8 FPS at all PixelReadout 16 bit)
SNR Max: 47.1 dB (Low Noise Mode)
Dynamic Range: 86.8 dB (Low Noise Mode)
-35°C below Ambient under Short Exposure/ -40°C under Long Exposure Time(> 1s)
IMX571 Sensor and Its Pixel Structure
ATR3CMOS Datasheet
Sensor |
Sony IMX571 back illuminated sensor color |
|
Diagonal |
28.3 mm |
|
Image Resolution |
26 mega pixels(6224*4168) |
|
Pixel Size |
3.76mm ´ 3.76mm |
|
Image Area |
23.4mm ´ 15.7mm |
|
Max FPS at |
16bit |
8bit |
6.8 FPS @ 6224*4168 28 FPS @ 3104*2084 63 FPS @ 2064*1386 |
13.2 FPS @ 6224*4168 37.1 FPS @ 3104*2084 110 FPS @ 2064*1386 |
|
Max FPS at |
16bit |
8bit |
0.6 FPS @ 6224*4168 3.6 FPS @ 3104*2084 8.5 FPS @ 2064*1386 |
1.2 FPS @ 6224*4168 7.0 FPS @ 3104*2084 15.7 FPS @ 2064*1386 |
|
Max FPS at Resolution |
16bit |
8bit |
3.4 FPS @ 6224*4168 (Low Noise Mode is only available in All Pixel Readout Mode) |
12.7 FPS @ 6224*4168 (Low Noise Mode is only available in All Pixel Readout Mode) |
|
Max FPS at Resolution |
16bit |
8bit |
0.3 FPS @ 6224*4168 (Low Noise Mode is only available in All Pixel Readout Mode) |
1.2 FPS @ 6224*4168 (Low Noise Mode is only available in All Pixel Readout Mode) |
|
Shutter Type |
Rolling shutter |
|
Exposure Time |
0.1ms – 3600s |
|
Gain |
1x – 100x |
|
SNR |
47.1 dB |
|
Dynamic Range |
86.8 dB (Low Noise Mode) |
|
Read Noise |
2.6 – 1.14 e- |
|
Read Noise (Low Noise Mode) |
2.35 – 1.16 e- |
|
QE Peak |
>80% |
|
Full Well |
51ke- |
|
ADC |
16bit |
|
DDR3 Buffer |
512MB (4Gb) |
|
Connection Port |
USB3.0/USB2.0 |
|
Camera Adaptor |
M42 ´0.75mm |
|
Protect Windows |
IR-cut filter/AR-window |
|
Spectral Range |
380-690nm (with IR-cut filter) |
|
Capture/Control SDK |
Windows/Linux/macOS/Android Multiple Platform |
|
Recording System |
Still picture and movie |
|
Camera Dimensions |
Diameter 80mm * height 103mm |
|
Camera Weight |
0.552kg |
|
Back Focus Distance |
17.5mm |
|
Cooling: |
Two stage TEC |
|
Effective Cooling Temp: |
-35°C below ambient under short exposure/ -40°C
under |
|
Supported OS |
Microsoft® Windows® XP /Vista/ 7/ 8 /10 (32 & 64 bit) OSx(Mac OS X) Linux |
The sensor G Sensitivity of ATR3CMOS26000KPA is 484.6mv with 1/30s. Its spectral sensitivity is shown
The ATR3CMOS26000KPA has built in 16bit ADC. It also has 12bit output mode for hardware binning and smaller resolution. The camera also supports hardware ROI, and the smaller the ROI size is, the higher the frame rate is.
The table shows the frame rate of the ATR3CMOS26000KPA in 16/8bit mode, USB3.0 / USB2.0 data transfer interface at different resolutions.
ATR3CMOS26000KPA FrameRate at Different Resolution/Data Bit/Data Transfer (USB3.0/ USB2.0)
Bit & Interface FPS Resolution |
16bit ADC |
8bit ADC |
||
USB3.0 |
USB2.0 |
USB 3.0 |
USB 2.0 |
|
6224 * 4168 |
6.8 |
0.6 |
14.2 |
1.2 |
6224 * 4168 (Low Noise) |
3.4 |
0.3 |
NA |
NA |
3104*2084 |
28 |
3.6 |
37.1 |
7.0 |
2064*1386 |
63 |
8.5 |
110 |
15.7 |
The ATR3CMOS camera body, made from tough, alloy, ensures a heavy
duty, workhorse solution. The camera is designed with high
quality IR-CUT to protect the camera sensor and block the IR
light. No moving parts included.
These measures ensure a rugged, robust solution with an increased
lifespan when compared to other industrial camera
solutions.
Camera Outline and Interface
Packing Information of ATR3CMOS
Packing Information of ATR3CMOS
A |
Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton, 0.045m3), not shown in the photo |
B |
3-A safety equipment case: L:28cm W:23cm H:15cm (1pcs, 3.9Kg/ box); carton size: L:28.2cm W:16.7cm H:25.5cm(TBD) |
C |
ATR3CMOS series camera (M42x0.75 Mount) |
D |
Power adapter: input: AC 100~240V 50Hz/60Hz, output: DC 12V 3A |
E |
High-Speed USB3.0 A male to B male gold-plated connectors cable /1.5m |
F |
M42X0.75(camera) to 1.25”and 2'' (telescope) adapter |
G |
CD (Driver & utilities software, Ø12cm) |
From Left to right
a)ATR3CMOS camera with M42x0.75 mount;
b) ATR3CMOS camera+M42x0.75(Camera) to C-mount adapter;
c) ATR3CMOS camera+M42X0.75(camera) to 1.25”(telescope) adapter;
d)ATR3CMOS camera+M42X0.75(camera) to 2”(telescope) adapter
No.866, Nanpu Road, Yanjiang Street, Pukou District, Nanjing, China