2.0 Inch Car Dash Cam With Full Hd 1080p User Manual Vehicle Blackbox Car Dvr Dash Camera Recorder

WDR Full Hd 1080p User Manual Vehicle Blackbox Car Dvr Dash Camera Recorder

Buttons Function Explanation:
1. Back fixing hook: Install and hold the camera recorder.
2. Menu/Previous Button:
    Long press this button to switch among recording setting, camera setting and system setting. Short press this button is previous option.
3. TF card slot:  Designed to insert TF card or micro SD card.
4. Mode/Next Button
    Long press this button to switch among playback mode, recording mode and camera mode. Short press this button is next option.
5. Mini USB port
    USB data port is used to ① connect PC for transferring data; ② connect external power bank to charge the battery or supply working power.
6. Reset:  Reset hole to reboot and recover the camera recorder when it crashes in accident.
7. Rear camera connector (Not included):  It is used to connect the rear camera. Not included in the package.
8. LCD display screen:  Image display.
9. Power light: The red light will be on when connect the power.
10. Power/OK Button: Long press this button is power on/off option, short press is OK option.
11. Recording light:  The blue light will be on when connect the power, the light will flash when recording.
12. Speaker: It is the speaker hole where the sound comes from when playing video, audio and notification ringtone.
13. Fill light: It can open the fill light function to supplement lamp when recording or taking pictures.
14. Lens: Viewing window.
15. MIC: The microphone receiver hole when recording audio.

Special Function Description:
Automatic Power On/Off
     The device will turn on the power and recording automatically when the camera recorder connects to the vehicle power. It will automatic save the records and power off when the vehicle is off.
Do not leak a second
      It will save the vital videos in case losing or damaging the videos when an accident occurs, the TF card slipped out or the power connection is loosen.
Motion detection
      If there is a target moves forward when the camera recorder standby, it will record all the motion track automatically.(The device will stop recording when there is no motion object after power on to prolong video storage time)

Recording/Photographing Basic Operation Instructions:
   Power On and Power Off
   Press "Power/OK Button" Power button once is power on, the blue power light will on.
   Press "Power/OK Button" Power button again is power off, the blue power light will off.
   Attention: The camera recorder will automatic power off when the battery is low after notice the low battery voltage.
   Recording Mode
   Long press the Mode button, switch to Recording mode, the screen left upper corner will display recording icon; Short press OK button to begin recording, the recording icon will flash red, indicating it is under recording.
   Photographing Mode
Long press the Mode button, switch to photographing mode, the screen left upper corner will display photographing icon; Short press OK button to photograph, "Click" sound shows a photo taken.
   Video/Picture Playback
Long press the Mode button, switch to Playback mode, the screen left corner will display playback icon. Short press Previous button or Next button to select file, short press OK button to play video or picture.
   Menu Settings
Long press the Menu button to enter the menu selections, press Previous button or Next button to select option, short press OK button to select.
   Time Settings
Long press the Menu button to enter system settings, select "Date/Time" option, Adjust the correct number on Year/Month/Day, short press OK button to save.

USB Mode(The USB connection cable need to buy separately):
Connect the USB cable to the computer, it will auto eject USB menu. Below are three modes available:
    1) Memory Mode
Select this mode enables to save the video and picture files.
    2) PC Camera Mode
Select this mode will eject USB video equipment to real-time photograph or video chat.
    3) Recording Mode (The USB cable is used as power supply in this mode)
Select this mode can record videos, switch photography mode can take pictures.

Battery Charge Instructions:
There are three methods to charge the battery. The red power light will on when charging, the charge period will take about 180 minutes, the red power light will auto off when the charge complete.
     1. Charge by power adapter
     2. Charge by PC-USB
     3. Charge by car power
Note: If the product crashes or freezes caused by improper operation, it can recover by pressing the RESET button to reboot the device.

Trouble Shooting:
     If the product encounters a problem in normal operation, please follow the below instructions to solve the problem:
     Unable to take picture or video
Check whether the TF card has enough memory left or whether the TF card has been locked.
    Stop recording when recording videos
The HD video data is enormous, please use High Speed TF card compatible with SDHC. The High Speed TF card has C4/C6 mark.
     Indicate "Profile Error" notice when playback pictures or videos
A error has occurred when the TF card save files that results the profiles incomplete, please Format the camera recorder and TF card.
     The video images are vague and foggy
Please check whether there is dirt or finger prints on the sensor. Please clean the sensor before recording.
      The video images are very dark when shooting the sky, water or other scenes.
It will affect the camera exposure function in different scenes. It can be revised by adjusting the "EV" data in the Settings Menu.
      The image color is not good in cloudy day or indoor
Please check whether the "White Balance" function has been selected "Auto"
       Vertical interface in images
This is caused by the wrong power frequency setting, please set 50Hz or 60Hz according to the local power frequency.
       Crash
Please press the Reset button to reboot the device.

Main Menu Function Introduction:
Resolution:
     Select the camera recorder video resolution, the higher the resolution, the clearer the video. Enter the video resolution menu to select one and press OK button to confirm.
Photograph Quality:
     Select the camera recorder picture resolution, the higher the resolution, the clearer the picture. Enter the Photograph resolution menu to select one and press OK button to confirm.
Loop Recording:
      The Loop recording videos can be set the timing 1 min, 3 min, 5min, 10min.
White Balance:
      Used for color choice in different environment. (It's better to select Auto, in case the color distortion )
Exposure:
      Used to adjust the intensity of the light falling on the sensor. If the exposure is too high it will hard to recognize the vehicle license plate, it's better to select 0.
Motion Detection:
      When the Motion Detection is on, it will increase the storage time of the cyclic record videos in the TF card. When the camera recorder is standby, it will detect whether there is the moving object, and the recording will auto on if it finds a moving object.
Sound Recording:
      Used to select the recording sound. When there is no sound in the playback videos, please check whether this option has been on in settings menu.
Parking Guard:
       This parking guard will automatically begin to record when the vehicle manifests shake after the vehicle key is off (This function need to co-work with the Gravity Sensing function). This function can only be available when there is enough power in battery or connected the vehicle battery.
WDR:
       When the camera recorder detects the light is dark, it will turn on the fill light automatically to enhance the brightness. (Note: If this function has been on indoor, there will be obvious brightness change, it will affect the image definition in day time when the brightness inclines.) It is recommended to close this function in daytime.
Date Stamp:
       The data stamp will show when using computer to playback the videos or pictures.
Gravity Sensing:
       There are three options in Gravity sensing: Low, Medium and High.
         1. When there is a severe bump in vehicles, the video will be locked and will not be deleted by cyclic recording. (The high level gravity sensing will easily fulfill the memory card. If the memory card always indicates full, please format the card and set the low gravity sensing or close this function.)
         2. The Parking Guard function need the operation of Gravity Sensing. The camera recorder will automatically power on and begin to record when there is a shock, it will automatically power off after recording 18-20 seconds.
Beep Sound:
      Select to turn on/off the button sound.
Date/Time:
      Set the data and time. It will reset when the battery is empty.
Auto Power Off:
       The camera recorder will auto power off in setting time when there is no memory card inserted or no recording directive has been given.
Language:
       Set the camera recorder language as requires.
Frequency:
      The default frequency is 50Hz.
Fill Light:
      The Function to turn on the LED light (Apply to the products with LED lights).
LCD Brightness:
      If this function is on, the camera recorder will close its screen backlight in the setting time, the video recording function will stay on.
Format:
     TF memory card format (Better to format in about every 15 days). When there are too many videos locked and the memory card has been full, it can be deleted at once by formatting the card.
Attention: Please be careful to use this function when there is some important contents.
Default Setting:
      When there is some setting error, the default setting can be used to recover the factory setting.
Version:
      The factory manufacturing batch number.

Q 1. What is your terms of packing?
A: Generally, we pack our goods in neutral paper boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q 2. What is your terms of payment?
A: For small order,right now, we can only collect the payment by western union or moneygram or TT;
     For big amount, pls contact us to negotiate the proper payment methods.
Q 3. What is your terms of delivery?
A: EXW, FOB.

Q 4. How about your delivery time?
A: Generally, it will take 3 to 5 days after receiving your payment. The specific delivery time depends
on the items and the quantity of your order.

Q 5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q 6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q 7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q 8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
     2. With patience,professional, We offer the best aftermarket service to solve the problem you meet during using   our goods;
     3. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

If you have any questions, pls feel free to contact us by email Skype or Trademanager etc.

Shenzhen SUNTA Technology Co. LTD
[100% OEM Professional Manufacturer, Quality Assured, Competitive price, best service, fast shipment]
Contact: Jenny
Email: sunta01 AT sunta2000.com [ AT is @ ]
Mob : +86 13823269558
Skype:
Company Address: 4/F,Comprehensive Building of Science and Technology Park, East Ring Road, Yousong Community, Longhua District, Shenzhen
Web: http://www.sunta2000.com/