1GE+1FE+WIFI+CATV FTTH XPON ONU

Port	Shenzhen
Packaging	ONU, Power Adapter
Lead Time	1day

Contact Now

Product Details

Model Number:SUR3107XR

Type:FTTH Solutions

Use:FTTH

Application:FTTH FTTB FTTX Network

LAN Interface:1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE)

PON Interface:1 GPON BOB Class B+/Class C+

Optical interface:SC/APC connector Single Fiber

Transmission Distance:20km

Wavelength:Tx1310nm/Rx1490nm

Power Consumption:≤6W

DC power supply:+12V,1A

Transmitting optical power:+0.5~+5dBm/+2~+7dBm

Warranty:1 Year

Description

1. Overview

* SUR3107XR is designed as HGU (Home Gateway Unit) in
different FTTH solutions. The carrier-class FTTH application
provides different services access.

* SUR3107XR is based on mature and stable, cost-effective
XPON technology.

* SUR3107XR adopts high reliability, easy management,
configuration flexibility and good quality of service
guarantees to meet the technical performance of EPON Standard
of China Telecom CTC3.0 and GPON Standard of
ITU-TG.984.X




2. Functional Feature


* Support EPON/GPON mode and switch mode
automatically

* Support Route mode for PPPoE/IPoE/Static IP and Bridge
mode

* Support IPv4 and IPv6 Dual mode

* Support 4G WIFI and 2*2 MIMO

* Support CATV interface for Video Service and remote control
by Major OLT

* Support LAN IP and DHCP Server configuration

* Support Port Mapping and Loop-Detect

* Support Firewall function and ACL function

* Support IGMP Snooping/Proxy multicast feature

* Support TR069 remote configuration and
maintenance

* Specialized design for system breakdown prevention to
maintain stable system

3.Application

* Typical Solution：FTTH(Fiber To The
Home)

* Typical Business：INTERNET、IPTV、WIFI 、CATV
etc

Specifications

Hardware Specification

Technical item	Details
PON Interface	1 GPON BOB （Class B+/Class C+）
	Receiving sensitivity: ≤-27dBm/≤-29dBm
	Transmitting optical power:+0.5~+5dBm/+2~+7dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/UPC Connector
Chip Spec	RTL9601D ,CPU 300MHz,DDR2 32MB
Flash	SPI Nor Flash 16MB
LAN Interface	1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector
LED	4 LED, For Status of PWR、LOS、PON、LINK/ACT
Push-Button	2,For Function of Power on/off,Reset
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/0.5A
Power Consumption	<3W
Dimension	120mmx78mmx30mm(L×W×H)
Net Weight	0.13Kg

Panel lights Introduction

Pilot	Status	Description
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
LINK/ACT	On	Port is connected properly (LINK).
	Blink	Port is sending or/and receiving data (ACT).
	Off	Port connection exception or not connected.