1515 SHUTTLE LOOM PARTS TEXTILE PICKER AND BUFFER

FOB Price 1.2 - 3.3 USD / pcs

MOQ	1000 pcs
Port	qingdao
Packaging	100pcs/box

Product Details

1515 SHUTTLE LOOM PARTS TEXTILE PICKER AND BUFFER,Textile leather 1515-277 textile leather ring and loom buffer ring are made of rubber. The inner length of the leather ring is 277mm, which is suitable for export 1515 loom equipment. Each machine uses 2 pieces. The leather pillow R54 fixed at both ends is processed by adding elastic rubber, and is fixed by a card slot to prevent left and right swing, which can ensure the accuracy of each hitting point of the shuttle board. Leather kernel for textile machine; leather ring; all kinds of Dingqing buffer parts; Dingqing parts.

The picker height of 1515 knot fittings loom is 34 mm. The knot fittings of textile leather and tape fittings, models R00-2 and R00-3 are 102 mm in length and 31 mm in width. The angle between the bottom and one side is 86.5 degrees. The knot fittings of 1515 are composed of R33, R54 or R34 and R54. No cracks are allowed during the use of the knot, and the depth of the shuttle eye is less than 16 mm. The material of loom shuttle joint is rubber+canvas+metal rivet.

The brand of 277 buffer ring for textile export: ZDP, made in Shanghai, is suitable for 56 inch, 75 inch and 63 inch 1515 looms. Some 75 inch looms of some manufacturers use 285 leather rings, which is equivalent to an increase of 1cm in the inner length of the leather rings. In this case, the textile leather rings do not have the effect of buffer in the sliding box. Although the damage rate of the leather rings is reduced to some extent, the damage rate of the leather knots, shuttle boards and The loss of the shuttle box will increase.

The leather knot of 1515 loom is mainly used for wide looms (56 inches, 75 inches, 63 inches, etc.). The leather knot of 1515 loom is increased by 2 mm on the basis of 1511 model, and the position of shuttle eye is moved up by 1 mm. Packaging: Carton, 100/case, leather knot R divided into left hand and right hand (determined by the direction of 86.5 degrees between the bottom and side of the shuttle knot).