MOQ | 5000 piece |
Port | Shanghai |
Packaging | Blister packaging |
Lead Time | 20-30 |
Tape color | yellow |
Applicable lamp power: 150W metal halide lamp, ceramic metal halide lamp, high pressure sodium lamp
Rated voltage: 230V/110V Voltage range: 160V~265V/85V~165V
Input power: 155W Output power: 150W
Power factor: ≥ 0.99 Efficiency: ≥ 95%
Working current: 0.68A/1.36A Peak ratio: <1.7</b<>>
Maximum temperature rise: 25 °C/77 °F
Dimensions: 145*105*75 (mm)
Ambient temperature: -25°C~+65°C -13°F ~ +149°F
Support multiple dimming modes: manual knob dimming, automatic timing dimming, 0-10V dimming, remote dimming, etc.
(Above picture shows non-dimmable product.
Multiple protections: open circuit, short circuit, lightning protection, overvoltage, overcurrent, overtemperature and other protection functions to prevent electromagnetic interference, no flicker, no noise, and comfortable lighting effect.
40% energy saving compared to induction ballasts
High efficiency, high power factor (> 0.99)
Dimming products adopt "asynchronous" mode to avoid the impact of simultaneous dimming of all lines on the power supply system
Original components are made of imported materials. SMT mounting process and strict inspection procedures protect the excellent performance of each product. All products are guaranteed for 3 years
Before installing the device, please read the manual carefully and install it in strict accordance with the installation diagram to avoid burning the product.
To reduce the risk of electric shock, do not disassemble the product. Maintenance should be performed by professionals.
The voltage at the output terminal exceeds 3kV, so the power must be cut off during installation, maintenance or inspection.
In order to ensure the best working condition of the light source, the ballast should be used together with the corresponding lamp
B7-2, SME Industrial Park, Huaishang District, Bengbu City, Anhui Province