12V Auto Gearbox Flush Cleaning Machine Cleaner
Transmission Fluid Oil Exchange
Description:
This Transmission Fluid Flush Exchange Machine, its flow
direction is automatically controlled, and the flushing
oil exchange machine has an equal amount exchange system.
The power of gear- box and the exchanger is easily used
to change the oil. The efficiency is indicated when it
works on what you want to remove such as the grease and
metal fillings. You can use it and install it easily. You
can't miss it !
How to use:
1. Fill the new oil barrel into the 12 liters of automate
gearbox barrel. Turn the left switching valve to
"PRESSURE", and the right to "RECYCLE". If external new
oil is needed, then link the transparent vitta and the
external new oil "FILLING", and turn the right switching
valve to "FILLING".
2. Find out the cool off oil vita ATF.
3. Start the engine temporarily and judge the direction
of the outlet and input oil of both side.
4. Link the cool off oil vitta and the sphere valve, link
the red outlet oil valve to the native machine "RETURN",
while the input oil vitta is linked to the native
machine's blue plastic oil vitta "PRESSURE".
5. Butt the roof of the car, since every impetus gear
needs operating.
6. Link the compressor and the joint "AIR".
7. Start the engine, Cutting in gear makes the used oil
in the automate gear box barrel back to the native
machine's used oil barrel to 3-4 liters.
8. Switch down the sphere valve of red outlet oil vitta,
turn on the switching valve of the native
machine("+"direction means enlarging the volume"-
"direction means diminishing the volume), first adjust
the pressure to 30PSI, then begin to fill new oil into
the gear box, auto-speed-variable box then begins the
exchange of new and used barrel, decide whether to
enlarge or diminish the pressure.
9. The inspection window of the machine "NEW OIL "is
which the new oil runs through, the inspection window of
the outlet oil "USEDOIL" is which the used oil of gearbox
runs through.
10. Pay attention to the change of volume and color of
the oil in the inspection window of the outlet oil "USED
OIL", then we can adjust the volume at any time in order
to meet the need of the oil volume in the gearbox, until
the outlet oil change from foul into the same color as
new oil.
11. While the new oil and used oil is exchanging, every
gear is shifted. Stay for 5-10 seconds depending on
complexion.
12. Connect the vitta of gearbox, start the engine, fill
in "P" oil catch, supply ATF oil depending on oil level,
meanwhile check if there is any oil leaked. When the oil
level is enough, check every mile when attempt to
drive.(which is absolutely necessary)