12meters Bus spray booth

FOB Price 24300 - 30000 USD / Set

MOQ	1 Set/Sets

Quick Details (View All)

Type	Spray Booths	Power	N/A
External Size	N/A	Internal Size	N/A
Voltage	220V/380V	Certification	ce
Disc Dia.	N/A	No Load Speed	N/A
Place of Origin	Guangdong, China	Brand Name	BH
Model Number	1200#	Color	Red

Product Details

FB-1200

12m Bus Spray Booth

Merits
Our BZB-FB-120012m bus spray booth is applicable for the repair and fabrication of various transportation tools, such as the vans, as well as the medium-sized bus of 10m long.

Features
1. The wallboard is composed of the EPS insulation board of 70mm thick and the colorful steel plate of 0.426mm thick. The wall panel of the chamber is coordinated with the steel column and the composite beam.

2. Our 12m bus spray booth adopts Philips lights. All lights are equipped with the well-known brand electronic ballast. They perform much better than the previously used electronic lamps.

3. Four 4kW centrifugal fans are used for supplying air. Two 7.5kW belt-driven fans with large impeller are utilized for discharging air. Then, the air circulation ratio inside the chamber can be well guaranteed, and the paint mist can be discharged easily.

4. Beyond that, our 12m bus spray booth is designed with two G20 burners of Italy Riello brand.

5. The power-driven three-dimensional trolley can be optionally installed.

6. As an option, this product can be purchased without the trench, and the return air is brought from the side.

Configuration List

External Dimension (mm)

Internal Dimension (mm)

Gate Size (mm)

Total Power (kW)

12146×6096×4600

12000×4500×4000

3300(width)×3900(height)

34.5

Trench

Two rows of trench are used to exhaust the air. Each row of the trench has the dimension of 10000×840mm (L×W). In addition, the trench is covered with the galvanized floor grating.

Front Door

Our 12m bus spray booth is installed with three single doors. The frame of the door adopts the folded edge which is made of the coated steel plate. Moreover, the EPS board is used as the wall panel.

Service Door

There are totally two service doors with the dimension of 700×2000mm (W×H). The door is mounted with a pressure lock.

Chamber

1. The steel reinforcing rib is mounted in the middle of the wall.
2. The ceiling is installed with the steel composite beam.
3. Moreover, the insertion type flame-retardant polystyrene insulation board is adopted. The wall board is 70mm thick and 1150mm wide. The colorful steel plate is provided with the thickness of 0.426mm.
4. The roof panel is assembled by the premium-quality steel plate.

Cabinet

1. The air is supplied from the side, and discharged from the back.
2. The framework is made of the coated profile.
3. The outer layer is the externally painted plate. The inner layer is the galvanized steel plate. The middle layer gives the function of thermal insulation.

Air Supply System (2 sets)

1. Each set has two double-inlet centrifugal fans. Totally four double-inlet centrifugal fans are equipped to supply the air. The model and technical parameters of the fan are described as follows.

Model	YDW4.5L
Power	4.0kW
Flow Rate	12,500m3/h

2. The fan cabin is formed of the coated profile as well as the coated steel plate.

Air Exhaust System (2 sets)

1. For discharging air, two 7.5kW centrifugal type exhaust fans with large impeller are configured. The model of the fan is 4-82. The motor is installed externally. Moreover, this fan is driven by a belt, and has an air capacity of 21,000m3/h.
2. The exhaust cabin is constructed from the coated profile and the coated steel plate.
3. The exhaust duct is composed of the premium-quality galvanized steel plate and the professionally made flange. It is also designed with a manually adjustable damper.

Heating System (2 sets)

1. Our 12m bus spray booth is configured with two sets of Riello-brand G20 type burners. The maximum heating value reaches up to 400,000Kcal/h.
2. The heat exchanger is made from reliable-quality SUS304 stainless steel by adoption of argon arc welding technology.
3. The heat generator has received a spray finish.
3. The electric actuator is imported from Switzerland with original packaging. It allows the automatic changeover of spraying and curing to come true.
4. The highest temperature reaches 80 degrees Celsius.

Filter System

1. The intake air is primarily filtered.
2. This 12m bus spray booth makes use of three different filters, including the high-class ceiling filter, the glass fiber filter, and the activated carbon being placed horizontally.

Lighting System

1. Side of the Ceiling: 16 groups × 4 pieces=64pcs 36W Philips tubes
2. Side of the Waist: 10 groups × 2 pieces =20pcs 36W Philips lamps
3. The electronic ballast is provided for exclusive use. It can be connected with two light tubes.
4. The intensity of illumination reaches 800Lux.

Electric Control System

1. A push-button face plate serves to control this system.
2. The main circuit features multi-protection.
3. The system makes use of the lighting switch, temperature and time settings, room-temperature or constant-temperature paint spraying, paint-curing switch, emergency stop switch, fault alarm, timer, temperature limiter, and more.

Hot Water and Steam Heater of Spray Booth
The hot water and steam heater of spray booth refers to the finned-tube air heat exchanger. It is mainly used for heating air in the drying system, thus being the major device for heating air. The radiator can use steam, hot water, or heat-transfer oil as the thermal medium.