MOQ | 1 2600 |
Port | TIANJIN PORT |
Packaging | Wooden box packaging |
Product name | cable fault pre-locator | Friendly user interface | Easy to carry |
Measurement distance | 100km | Sampling frequencies | 200MHZ |
Resolution | 0.4m | Signal gain | 70dB |
VOL | 274*218*81MM | Power supply | 18650 li-ion batteries*2 |
Products name
0-35KV Electric Usage Cable Fault Locator Power cable detector
tdr cable locator
Products spacification
1.The PCLC-901D Power Cable Fault Pre-locator is an easy
operation device used for distance locating . It’s easy to
operate,support both touch screen/button operation and with
friendly interface. PCLC-901D can be used alone under the low
voltage impulse mode. Under the mode of impulse current,PCLC-901D
needs to work with HVSG-500GX high voltage generator items.Under
the multiple impulse mode,PCLC-901D also need PCLC-900C
coupler.After distance locating,user could use PCLD-901P items
for fault pinpointing. And these products can be combined into a
set of high performance and innovative cable fault testing
system.
2 FUNCTION FEATHER:
2.1.Multiple distance locating method: Low current impulse
method: apply to the locating of the low resistance fault.
Short
circuit fault, open circuit fault. It also can be used in the
measurement of the cable length, the intermediate joints, T
joints,
and cable termination joint. This method also can be used to
correct the wave velocity. Impulse current method: apply to the
high
resistance fault, breakdown fault. Use the current coupler to
gather signal from the earth wire Multiple impulse
method:
improvement of the SIM method .
2.2.200MHz real-time sampling Advance tech.Upgrading for SIM
method Max. 0.4m measurement resolution,PCLC-901D has small
blind
zone and is special for the short cable and nearly-terminal fault
cable .
2.3.Touch screen and press key operation Touch operating screen
with smart gesture operation Support cursor drag-drop function
and
double-click function,easy to locate Simple function menus with
high performance.
2.4.Big color LED screen, friendly interface Simple function
menus with high performance
2.5.7" LED screen,160°viewing angle,bright with 750cd/m2 to view
under sunshine PIP copy(pic. temporary storage). There'll be
a
main window and three temporary storage windows could check three
waveform together.
2.6.Waveform storage and PC communication Special software
management for software upgrade, backup and restore in device.
Waveform
storage and communication with computer. Internal storage of
waveform. Optional mini printer for waveform printing
Support
connection with PC or laptop.
2.7Power management Back light weakens if no operation in 2 min
and power off in 10 min. if no operation. Built-in
Polymer
Lithium-ion battery. Working time could reach 7 hours for each
use.