GR1 Titanium Powder Sintered Filter plate (including tube type and plate type) is a micro filter
element made of sponge titanium powder as raw material, after sieving, molding, and high-
temperature vacuum sintering. It has the characteristics of high filtration precision, good air
permeability, high mechanical strength, and high material utilization rate, suitable for higher working
temperatures and thermal shock. Widely used in pneumatic components, the chemical industry,
environmental protection, and other fields.
It can produce porous elements of various shapes, structures, different particle sizes, and porosity
according to user requirements, such as cover, cap, sheet, tube, and rod-shaped filter elements. The
high-temperature titanium powder sintered filter material has unique and excellent properties due to
its high-tech material composition and special molding process:
Filtration accuracy
Porosity
Permeability
Compressive strength
Temperature resistance
Maximum working pressure
0.22-100um
30-50%
3-1300m3/m3hkPa
3Mpa
280℃
0.6Mpa
Specifications
Diameter: Ф14mm -Ф80mm
Length: L300mm-L1200mm (can be customized according to requirements)
Thickness: above 2mm (other specifications can be processed as required)
Filtration precision: 0.22um-100um
Diameter: Ф5-Ф300mm
Thickness: 0.5mm-10mm
Filtration precision: 0.22um-100um
titanium powder sintered filter tube and plate
Processing
1. Powder wash→Drying→
Through the rolling mill pressure molding→Into the vacuum sintering furnace oxide
→Annealing leveling→Baiting→Package
2. Powder wash→Drying→The powder into the mold→Into the Vacuum Sintering
→Annealing leveling→Baiting→Welding Plug→Package
Application:
1. Instrumentation;
2. Aeration filter;
3. Electrodes.
Precautions for use
1. The superalloy powder sintered filter element is a consumable item. Although it is more durable than other filter elements, care should be taken not to scratch, touch, smash, or drop during the cleaning and disassembly process to prevent man-made damage. It is strictly forbidden to use tools to apply force to the surface of the filter element.
2. Under normal circumstances, the filtrate is filtered from the outside to the inside of the filter element, and reverse filtration is not recommended.
3. When filtering, slowly pressurize to the required working pressure, and it is strictly forbidden to open the valve to quickly pressurize.
4. When the maximum working pressure is less than or equal to 3MPa, and the filtration efficiency is lower than 50%, it is necessary to use clean air or clean liquid to backflush online in time.
5. When performing backflushing and backflushing of the superalloy powder sintered filter element, generally use pure gas to backflush first. The backflushing pressure is 1.2-1.5 times the working pressure. The backflushing time is 3-5 seconds each time, and the operation is repeated 4- After 6 times, backwash with cleaning solution, and backwash for 3-5 minutes, 2-3 times.
6. If the pressure loss of the filter element is still serious after the online backflushing and backwashing, it should be removed in time for cleaning.
Precautions for the use of titanium-sintered porous materials:
During installation, disassembly, and cleaning avoid scratches, collisions, and falls on hard objects.1. When used, the filtrate is filtered from the outside to avoid the reverse direction.
Avoid instant pressurization when the filter element works.1. When the filtration efficiency is less than 50%, the filter element should be cleaned in time.2. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times.If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
If you have some interest or problem with titanium powder sintered filter materials, please feel free to contact us:
TEL: +8618992731201
FAX: 0917-3873009
EMAIL: [email protected]
ADD: 1502, Block A, Chuang Yi Building
No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China
GR1 Titanium Powder Sintered Filter plate (including tube type and plate type) is a micro filter
element made of sponge titanium powder as raw material, after sieving, molding, and high-
temperature vacuum sintering. It has the characteristics of high filtration precision, good air
permeability, high mechanical strength, and high material utilization rate, suitable for higher working
temperatures and thermal shock. Widely used in pneumatic components, the chemical industry,
environmental protection, and other fields.
It can produce porous elements of various shapes, structures, different particle sizes, and porosity
according to user requirements, such as cover, cap, sheet, tube, and rod-shaped filter elements. The
high-temperature titanium powder sintered filter material has unique and excellent properties due to
its high-tech material composition and special molding process:
Filtration accuracy
Porosity
Permeability
Compressive strength
Temperature resistance
Maximum working pressure
0.22-100um
30-50%
3-1300m3/m3hkPa
3Mpa
280℃
0.6Mpa
Specifications
Diameter: Ф14mm -Ф80mm
Length: L300mm-L1200mm (can be customized according to requirements)
Thickness: above 2mm (other specifications can be processed as required)
Filtration precision: 0.22um-100um
Diameter: Ф5-Ф300mm
Thickness: 0.5mm-10mm
Filtration precision: 0.22um-100um
titanium powder sintered filter tube and plate
Processing
1. Powder wash→Drying→
Through the rolling mill pressure molding→Into the vacuum sintering furnace oxide
→Annealing leveling→Baiting→Package
2. Powder wash→Drying→The powder into the mold→Into the Vacuum Sintering
→Annealing leveling→Baiting→Welding Plug→Package
Application:
1. Instrumentation;
2. Aeration filter;
3. Electrodes.
Precautions for use
1. The superalloy powder sintered filter element is a consumable item. Although it is more durable than other filter elements, care should be taken not to scratch, touch, smash, or drop during the cleaning and disassembly process to prevent man-made damage. It is strictly forbidden to use tools to apply force to the surface of the filter element.
2. Under normal circumstances, the filtrate is filtered from the outside to the inside of the filter element, and reverse filtration is not recommended.
3. When filtering, slowly pressurize to the required working pressure, and it is strictly forbidden to open the valve to quickly pressurize.
4. When the maximum working pressure is less than or equal to 3MPa, and the filtration efficiency is lower than 50%, it is necessary to use clean air or clean liquid to backflush online in time.
5. When performing backflushing and backflushing of the superalloy powder sintered filter element, generally use pure gas to backflush first. The backflushing pressure is 1.2-1.5 times the working pressure. The backflushing time is 3-5 seconds each time, and the operation is repeated 4- After 6 times, backwash with cleaning solution, and backwash for 3-5 minutes, 2-3 times.
6. If the pressure loss of the filter element is still serious after the online backflushing and backwashing, it should be removed in time for cleaning.
Precautions for the use of titanium-sintered porous materials:
During installation, disassembly, and cleaning avoid scratches, collisions, and falls on hard objects.1. When used, the filtrate is filtered from the outside to avoid the reverse direction.
Avoid instant pressurization when the filter element works.1. When the filtration efficiency is less than 50%, the filter element should be cleaned in time.2. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times.If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
If you have some interest or problem with titanium powder sintered filter materials, please feel free to contact us:
TEL: +8618992731201
FAX: 0917-3873009
EMAIL: [email protected]
ADD: 1502, Block A, Chuang Yi Building
No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China
Business Type | Manufacturer, Distributor/Wholesaler |
Company | Baoji Yinggao Metal Materials Co., Ltd. |
Main Products | Sintered Titanium Disc, Titanium Fiber Felt,Porous Titanium Filter |
Website | www.toptitech.com |
Established Year | 2011 |
City / State | Baoji , 陕西 |
Country | China |
Address | ADD: 1502, Block A, Chuang Yi Building No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China |
Location | Baoji |
Factory Size | 1000SQM |
Total QC Staff | 5 |
Total RND Staff | 20-50 |
Number of Production Lines | 3 Production Lines |
Annual output | |
Average Lead Time | 20 DAYS |
Total Revenue | Baoji Yinggao Metal Materials Co., Ltd. |
Export Percentage | Baoji Yinggao Metal Materials Co., Ltd. |
Nearest Port | SHANGHAI OR TIANJIN |
Overseas Office | ADD: 1502, Block A, Chuang Yi Building No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China |