: Dear Sirs and Madams.,
Greeting from Brazil.
We are looking for VIRGIN HDPE as High-density polyethylene resin supplier Petro Chemicals. (Virgin Product NOT recycle)
Description :
High density polyethylene copolymer, developed for the blowmolding segment.
It must shows well balanced proper es between impact and s ffness, combined with high environmental stress cracking resistance and processability.
Applications :
Tissue and hygiene packaging, Blow molding small volumes, to produce Cosmetic and Gallons hard packaging.
Processes : Blow Molding, Injec on blow molding.
Control Properties :
Feature - Method - Units - Values
Melt Flow Rate (190C/2.16kg) - D 1238 - g/10 - min 0.36
Density - D 792 - g/cm - 0.956
Typical Properties Plaque :
Plaque Properties necessary :
Feature - Method - Units - Values
Tensile Strength at Yield (a) - D 638 - MPa - 30
Tensile Strength at Break (a) - D 638 - MPa - 30
Flexural Modulus 1% Secant (b) - D 790 - MPa - 1350
Izod Impact Strength (b) - D 256 - J/m - 150
Environmental Stress Cracking Resistance notch
0,3 mm; 50C; 10% Igepal CO630 (a) - D 1693 - h/F50 - 30
Environmental Stress Cracking Resistance notch
0,3 mm; 50C; 100% Igepal CO630 (a) - D 1693 - h/F50 - 70
Deflection Temperature under Load at 0.455 MPa (b) - D 648 - C - 70
Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness : a) 2mm. b) 3mm c) 6mm. NB = No break.I
Final Remarks : VIRGIN (NOT RECYCLE)
BR
Mr. Klein
Brazil
Have you found what you were looking for? No? Post Your requirements for FREE!
Want to sell products to global buyers? Post Your Products Now! for Free.