Welding equipment

Buy offer Details

Set of welding equipment consists of the elements, fully comparable with the set of welding equipment.
1.1. Welding Inverter
Welding Inverter-a multifunctional power supply with a maximum current not exceeding 230 A, intended for professional metal arc welding, TIG and Methods TIG pulsed DC and AC current. Furthermore, the device allows the combination of AC and DC, and operate in a mode MIX TIG (combined TIG welding). Power source is controlled by transistors IGBX.
Specifications :
Type : Professional
Input : 1x230 V, 50/60Hz
Open circuit voltage : not more than 58
The energy consumption at idle : no more than 180 W
Welding Methods : TIG/MMA
Efficiency : At least 82%
Power Factor of at least 0.99
Cooling Method : cooling air temperature control
Power source dimension (L × W × C) : not more than 430 × 180 × 390mm
Power source weight : 15 kg
Digital Control Panel with LCD display on the basis of
Language localization of the Control Panel menu and Setup menu : Russian
Presettable Number of Technical welding programs : at least 20
1.2. Control Panel
Specifications :
Type of current (MMA and TIG) : AC, MIX, DC, DC +-Presence
Timer for gas blowing at the beginning and end of welding-Availability
Hotstart current, rise and fall of the current-Presence
Current display, voltage-presence.
QUICK SETUP-Presence
2 T and 4 T torch switch modes-the presence of
Spark and contact ignition (TIG)-Presence
Selecting the remote controller and the determination of the control range (LO/HI)-Choose
Burner Water Feeding function (WATER FILL)-Choose
Checking the gas supply (GAS TEST)-Choose
Burner switch modes 4T-LOG and MINILOG-Choose
Setting the starting current, equipped with the Minilog function, and end-the presence
Spot Welding timer-Availability
Long pulses-Availability
Synergetic quick pulse-Availability
Not less than 10 memory locations with MEMORY functions-Availability
1.3. Welding Torch
Specifications :
Electrode diameter from less than 1.0 to not less than 3.2mm
Burner length : not less than 4 m
Cooling Type : Air
TIG current at 40% duty cycle : 220A
PV % : 40
1.4. -Grounding cable5m x 25mm2
Specifications : Length-not less than 5 meters, the cross-section-not less than 25 mm² with plug SKR-31 and the ground terminal, voltage of 80 volts.
1.5. Welding cable with connectors 5 m x 25mm2
Specifications : Voltage of 80 volts, length-at least 5 meters cross-section-not less than 25 mm² with the connector EMM-31 and electrode Holder
1.6. Gas Nozzle ?6 (10mm)
Specifications : Ceramic Gas Burner Nozzle for argon. Nozzle diameter not less than 9.5mm, the outer diameter of the nozzle at least 14,5mm length of at least 47,5mm
1.7. Nest Collet 2.4
Specifications : Collet holder TIG torch. The diameter of at least 2.4mm.
1.8. Teflon insulation ring
Specifications : Insulating Teflon ring for TIG torch. Intended for tightness and thermal torch body
1.9. Collet 2.4
Specifications : Holder tungsten electrode TIG torch.
1.10. Cap Electrode
Specifications : Plastic cap for sealing TIG torch, protecting the tungsten electrode is long. The length of at least 138mm.
1.11. The training tasks welding.
Welding Machine new (not second-hand, repaired, is not restored, at which no replacement components are not restored consumer) in good condition, no damage, no defects in the quality of its production or to the quality used in its manufacture of materials, complies with fire safety and environmental requirements, Free from rights of third parties, and is not the subject of a pledge, attachment or other encumbrance, or the latest production model, which reflects all the latest modification of structures and materials that meet the following specifications and requirements.
The warranty period of not less than 24 months from the date of signing the act of acceptance of the goods.
Year of production 2018 NOT PREVIOUSLY.
Power supply, in no more than 400
The frequency at least 50Hz
MIG Welding current, rather than less 20
MAG Welding current, rather than less 320
Range of welding voltage, AT by no more than 8 to not less than 32.5 (min-max)
Open circuit voltage in a no less 45
Power at maximum load, KW LEAST 12
The length of the burner, M LEAST 3.50
Fuse at least 10 A
Speed control wire range M/min of not more than 1.0 to not less than 20.0
Voltage Adjustment range B of no greater than 8.0 to not less than 32.5
Dimensions (LxWxH), MM no less than 623h579h1070
Weight, KG. NOT MORE THAN 44
Insulation class protection LEAST IP23S
Welding Machine new (not second-hand, repaired, is not restored, at which no replacement components are not restored consumer) in good condition, no damage, no defects in the quality of its production or to the quality used in its manufacture of materials, complies with fire safety and environmental requirements, Free from rights of third parties, and is not the subject of a pledge, attachment or other encumbrance, or the latest production model, which reflects all the latest modification of structures and materials that meet the following specifications and requirements.
The warranty period of not less than 24 months from the date of signing the act of acceptance of the goods.
Year of production 2018 NOT PREVIOUSLY.