Water leak system specs
Water detector characteristics :
• Must be small and low power consumption
• Probes must be 1/8 inch from the floor
• Must communicate wirelessly with a controller (RF, High)
• Must send a signal to the controller only when water is detected
• Each detector can be identified (Addressable??)
Controller characteristics :
• Must communicate with the water detectors wirelessly (RF, High)
• If no water is detected, the controller must scan all water detectors every 24 hours
• If no water is detected, the controller will send a signal to the motorized valve (to close and open) once a week
• Must be able to drive a motorized valve (12 or 24 volt)
• Must have WiFi built in capability to communicate with the external world
• Each detector can be identified, editable (Addressable??)
• Must be able to handle 15 + detector
• Must show at the controller and send an alert WiFi, if a detector is low battery
• Must show at the controller and send an alert WiFi if the controller is low battery
• Must be able to have 20
Characteristics Operating :
• When water is detected, a wireless signal from the detector is sent to the controller.
• The controller will immediately send a signal to the motorized valve to close
• The controller must be manually reset to reopen the motorized valve when water is gone
Have you found what you were looking for? No? Post Your requirements for FREE!
Want to sell products to global buyers? Post Your Products Now! for Free.