SUS316 Hopper with 2-4 cubic meter internal volume.

Buy offer Details

Dear Sir/Madam,
This is ChloeHerman from AU.
Im looking for a powder storage hopper with the following specifications :
Hopper internal surface to be SUS316 with hygienic welds to prevent input material causing corrosion, especially along weld lines.
The input material has a density of roughly 700 kg/m3.
Hopper internal volume to be at least 2 cubic meters. We will consider 2-4 cubic meters.
The height from dispensing outlet to the top of the hopper must be no greater than 2 meters.
It must be possible to elevate the hopper so that the outlet is approximately 2 meters above the ground.
We will need another two hoppers after this with approx. 1-2 cubic meters of internal volume.