Semi-automatic welding equipment

Buy offer Details

Semi-automatic welding equipment includes :
1.1. Power supply
Specifications :
Year : 2018.
Type : Professional
electrical parameters :
- the number of phases, three phases;
- the mains voltage is 400 V;
- frequency of 50/60 Hz.
Welding current adjustment range :
- lower range : 40 * A;
- the upper limit of the range of not less than 420 A. *
Activation (MF) at maximum current : not less than 40% *.
Protection class : not less than IP23 *.
Dimensions :
- altitude : ? 900 mm *;
- width : not more than 750 mm *;
- Length : not more than 1050 mm *.
Weight : no more than 160 kg *.
Ability to connect synergic control panel.
1.2. Wire feeder (Compatible with 1.1)
Specifications :
Year : 2018.
Number of feed rollers 4.
Maximum wire feed speed : * at least 20 m / min.
The maximum coil diameter : not less than 300 mm *.
1.3. A set of rollers for the wire feeder (Compatible with 1.2).
1.4. Control Panel (Compatible with 1.1)
Specifications :
Year : 2018.
Type - synergetic.
1.5. Burner(Compatible with 1.1)
Specifications :
Year : 2018.
Burner length : not less than 4.5 m *.
The maximum diameter of the steel wire : * at least 1.6 mm.
PV at a maximum current of not less than 35% *.
Type of cooling : gas.
1.6. control cable(Compatible with 1.1)
Specifications :
Year : 2018.
The cross section of the welding cables : not less than 50 mm2 *.
Cable length : not less than 1.8 m *.
Type of cooling : gas.
1.7. grounding cable (Compatible with 1.1)
Specifications :
Year : 2018.
Cross-section : 50 * mm2.
Cable length : not less than 5 m *.