MIPI-CSI2 Flex Cable (Flex PCBA)

Buy offer Details

Dear Sir/Madam,
Im looking for a MIPI-CSI2 flex cable with the following specifications :
- Length : 9cm
- 2 different connectors, specified by us (AXT436124, MPN : 503772-2410)
- Panel layout for SMT
Design guidelines :
1. All flex circuits must be designed for 100-ohm differential impedance on the MIPI DATA and MIPI CLK lines.
2. All MIPI DATA and CLK lines M&P lines must be length matched to within 0.7mm (intra-lane skew).
3. All MIPI DATA and CLK lines must be length matched to other pairs within 1.4mm (data-to-clk skew).
4. The other outer layer of the flex must be GND shielded either with hatching or solid GND. Impedance control must still be met regardless of the GND fill method.
Destination : San Diego, CA USA